Use LEFT and RIGHT arrow keys to navigate between flashcards;
Use UP and DOWN arrow keys to flip the card;
H to show hint;
A reads text to speech;
7 Cards in this Set
- Front
- Back
- 3rd side (hint)
Name the five basic joints |
Butt, Corner, Tee, Edge, Lap |
BCTEL |
|
List the 4 weld type |
Plug/slot, surfacing, Fillet, Groove |
Pussy sure feels good |
|
4 variations of fillet welds |
Continuous, intermittent, staggered intermittent, Chain intermittent |
|
|
Name 5 types of groove welds |
Square, bevel, J, U, V |
|
|
What is the main advantage of the lap joint |
No edge penetration required |
|
|
When using edge, corner and tee joints, when should you consider preparing the joint edges? |
When working with thicker materials where full penetration is required |
|
|
Which groove weld requires the least amount of weld |
Double U |
|