• Shuffle
    Toggle On
    Toggle Off
  • Alphabetize
    Toggle On
    Toggle Off
  • Front First
    Toggle On
    Toggle Off
  • Both Sides
    Toggle On
    Toggle Off
  • Read
    Toggle On
    Toggle Off
Reading...
Front

Card Range To Study

through

image

Play button

image

Play button

image

Progress

1/17

Click to flip

Use LEFT and RIGHT arrow keys to navigate between flashcards;

Use UP and DOWN arrow keys to flip the card;

H to show hint;

A reads text to speech;

17 Cards in this Set

  • Front
  • Back

How many flights director's are installed?

2

How many auto pilots are installed?

1

What provides guidance for the autopilot?

The flight directors.

What controls the flight directors?

Flight Control Computer 1 FCC1 controls FD1


FCC2 controls Flight Director 2 FD2

Which flight director is default?

Flight Director 1

What does pressing the XFR button on the flight control panel do?

Transfers the autopilot and flight directors to flight director 2.

What happens when TOGA button is pushed an the ground?

The autopilot is disengaged


The lateral and vertical Takeoff modes are activated. TO/TO

What does the lateral TO mode do?

Updates FMS with current location


Generates a heading hold command at Weight off wheels


Limets flight director steering commands to 5° of bank.

What does vertical TO mode do?

Generates an optimized flight director pitch up command.

What happens when the TOGA button is pushed in flight?

The autopilot is disengaged


The lateral and vertical Go-Around modes are activated. GA/GA

What does the lateral GA mode do?

Generates a heading hold command


Limits flight director steering commands to 5° of bank.

What does the vertical GA mode do?

Commands the flight director to a 10° pitch up attitude.

Where are the selected lateral and vertical flight director modes displayed?

On the Flight Mode Annunciator FMA at the top left of the PFD

What are the auto pilot minimum use heights?

600 ft AGL take-off or go-around


400 ft AGL non-precision approaches


80 ft AGL precision approaches

Auto pilot min use hieght for a single engine precision approach?

900 110ft AGL


900EP 110ft AGL


700 80ft AGL

How can the autopilot be manually disconnected?

AP/SP DISC button on either control wheel is pressed


AP ENG button on FCP is pressed when AP is already engaged


AP DISC switch bar on the FCP is pushed down


TOGA button on either thrust lever is pressed


STAB TRIM manually operated on either control wheel


YD DISC button is pressed

When will the autopilot automatically disconnect?

Both yaw dampers fail


During windshear avoidance procedures


During a stall warning