Audio Production Chapter 2

Front 1

which of the following is not of the purposes of audio console

Back 1

to distribute the audio signal among various studios and/ or stations

Front 2

generally we say that adios is vibrating through air or other media, whereas sound is the electrical signal used in reproduction or transmission like broadcasting (T/F)

Back 2

False

Front 3

which of the following components is responsible for putting the signal over the air or turning it off

Back 3

"on buttons" or routing switches

Front 4

which of the following statements does not apply to the VU meter?

Back 4

not--> the BU meter controls the audio output of the console

Front 5

in order to broadcast a program on one channel and simultaneously record a commercial on another, the mixing console must have:

Back 5

both a program and audition output

Front 6

to prevent feedback from occurring whenever the operator opens a mic, a duo boards have:

Back 6

muting systems

Front 7

which of the following is NOT a feature of the audio console

Back 7

not--> user headphoneshe purpose of the (blt

Front 8

the purpose of the (blank) is to adjust the overall signal output of all channels on the board

Back 8

master pot

Front 9

in digital aduo consoles the channel fader:

Back 9

modifies the value of the sound input data stream but does not actually pass audio

Front 10

the electronic device that allows microphones and other analog devices to be used in a computer is the:

Back 10

The analog-to-digital converter

Front 11

according to your book, it is easier to run an air shift on a virtual console, as opposed to using a standard console: (T/F)

Back 11

False

Front 12

a submixer is a smaller console that allows inputs to be ganged together before being fed into the console (T/F)

Back 12

True

Front 13

Patching allows you to reroute the normal signal flown in the console and is useful for special operations or for emergency use of equipment not wired into the console (t/f)

Back 13

True

Front 14

On a patchbay, a normal connection is one that has the outputs of a source and an input on the board internally wired togetherwithout the need for a patch cord (T/F)

Back 14

True

Front 15

A (blank) is a special jack on a patch panel that allows you to plunge in several patch cords into one output and route the output to several inputs simultaneously

Back 15

Multiple

Front 16

Acoording to your book it is (more difficult or less difficult) to run an airsthuit on a virtual console

Back 16

More difficult