• Shuffle
    Toggle On
    Toggle Off
  • Alphabetize
    Toggle On
    Toggle Off
  • Front First
    Toggle On
    Toggle Off
  • Both Sides
    Toggle On
    Toggle Off
  • Read
    Toggle On
    Toggle Off
Reading...
Front

Card Range To Study

through

image

Play button

image

Play button

image

Progress

1/11

Click to flip

Use LEFT and RIGHT arrow keys to navigate between flashcards;

Use UP and DOWN arrow keys to flip the card;

H to show hint;

A reads text to speech;

11 Cards in this Set

  • Front
  • Back

777–200 Evacuation Routes

Land/ all exits are used


Belly/ all exits are used


Water/ all exits are used

777–300 Evacuation Routes

Land/all exits are used


Belly/doors 1,2,4 and 5 must be used


Doors 3 are a last resort for Belly and must be DISARMED if used


Water/doors 1,2,4 and 5 must be used


Doors 3 are alternate for Water and must be DISARMED if used

777–300 evacuation ropes

Located in the upper door frame of doors 3 only - used only in water evacuation

777 emergency call to flight deck

PILOT ALERT **

777 galley emergency power shut off

On electrical panel in each galley

777 designated fuelling emergency exits

200/ L1 and/or L2 and L4 or R4


300/ L1 and/or L2 and L5 or R5

777 oxygen mask deployment failure

Mask panels may be opened manually by inserting a sharp object into the pinhole of the mask panel

777 supplemental survival kits

200/2 each in the vicinity of L1, L2, R3 and R4


300/2 each in the vicinity of L1, L2, R4, R5

777–300 Doors 3 over wing emergency exit

Slides only


Must be disarmed in belly or water to prevent interference with slide rafts at door 4


Manual insulation handles are located at top of door


Slide inflation is indicated by Barber pole at end of the ramp

777 0FAR occupancy

Cannot be occupied during taxi takeoff landing or for operation under 25,000 feet or when amber AIRFLOW OFF light at entrance of OFAR is eliminated

777 0FAR temperature control

Works at 25,000 feet or above


Cannot be programmed or changed on the ground


Ground temperature reading is inaccurate