Use LEFT and RIGHT arrow keys to navigate between flashcards;
Use UP and DOWN arrow keys to flip the card;
H to show hint;
A reads text to speech;
13 Cards in this Set
- Front
- Back
Components on Hydraulic System A
|
Components on Hydraulic System A
|
|
Components on Standby Hydraulic System
|
|
|
Components on hydraulic system B
|
|
|
What does an illuminated STBY HYD LOW QTY light indicate?
|
low qty, appx 50%
|
|
What does an illuminated STBY RUD ON light indicate?
|
the standby rudder system is commanded on to pressurize the standby rudder power control unit.
|
|
What is indicated by an electric pump overheat light?
|
associated pump has overheated.
ABEX PUMP: the overheat light illuminates VICKERS PUMP: The overheat light illuminates and and power is removed from the pump, and the LOW PRESSURE light illuminates |
|
What happens in the hydraulic system when you pull an engine fire switch?
|
shuts off fluid to the pump and deactivates the LOW PRESSURE light
|
|
Hydraulic system
normal pressure max pressure min pressure |
normal: 3000psi
max: 3500psi min: 2800psi |
|
When is RF (refill) indicated next to hydraulic qty?
|
quantity less than 75%
|
|
What are the consequences of a leak in the STBY System?
|
complete fluid loss (B system to 72%)
|
|
What does the PTU do?
|
LED extension and retraction, autoslat operation (airborne, flaps less than 15 but not up, and loss of system B Engine driven pump pressure)
|
|
What does the LGTU do?
|
B system transfers fluid to system A to help raise the gear. Generally in the event that Engine #1 fails.
|
|
How is the STBY HYD system activated automatically?
|
Loss of system A or B, flaps not up, 60 KTS or greater or airborne or FFM activated.
|