Reading...
Play button
Play button
Use LEFT and RIGHT arrow keys to navigate between flashcards;
Use UP and DOWN arrow keys to flip the card;
H to show hint;
A reads text to speech;
10 Cards in this Set
- Front
- Back
|
The appropriate hardware for attaching a coaxial drop cable to wood are
|
(A) Screw-mounted cable clips.
(C) Gun-delivered cable clips. (E) Both A and C. |
|
|
)The hardware for attaching a coaxial drop cable to metal and
vinyl sided surfaces are |
(C) Designed so they do not disturb the weather integrity of
the surface. |
|
|
The appropriate hardware for attaching coaxial drop cables
to masonry brick, cinder block, and stucco |
(D) Requires a hardened carbide tip drill bit to predrill each
hole. |
|
|
When attaching a coaxial drop cable in crawl spaces,
unfinished or finished basements, and attics, |
(C) Securely attach the cable so that it does not present a
hazard to anyone accessing these areas. |
|
|
When attaching the exterior drop cable,
|
(A) Push the interior cable through the entry hole, leaving
the cable inside the premises. |
|
|
When attaching multiple cables to a premises exterior,
|
(D) Use multiple cable attachment hardware when drop output
and drop input cables converge along a common route. |
|
|
When installing an SDU box,
|
(B) Locate it at a height of no higher than 5 feet above the
ground. |
|
|
)If needed, which combination of two-, three-, and four-way
splitters will give exactly six output ports? |
(E) A two-way splitter into two three-way splitters
|
|
|
)Single and multiple output auxiliary house amplifiers
|
(D) Can be mounted inside a security box if used with a power
inserter and DC transformer. |
|
|
The furthest wall plate location is a distance of 50 feet from a measured input signal level of 10 dBmV. If the Series 6 coaxial cable used has a loss of 5 dB per 100 feet, and signals must pass through a two-way splitter with 4 dB loss, what will be the approximate signal level available at the wall plate?
|
(E) 3.5 dBmV.
|
