Reading...
Play button
Play button
Use LEFT and RIGHT arrow keys to navigate between flashcards;
Use UP and DOWN arrow keys to flip the card;
H to show hint;
A reads text to speech;
19 Cards in this Set
- Front
- Back
- 3rd side (hint)
|
The VLF PWR AMP circuit breaker on the P67-3, is supplied by which TRU? (Assume all buses are ISOLATED!)
|
MA-1
|
NFM-200, pg 18-9 Fig 18-2
|
|
|
The FMCS displays the channel numbers and three letter identifiers of the TACAN channels being autotuned at the bottom of the Data Sensors page.
|
False
|
NFM-000, pg 2-393 para 2.16.9.1 note
|
|
|
During a preflight interior inspection, either an RO or FT is responsible for assisting the Flight Engineer with all ground coordinated items marked with a double dagger.
|
True
|
NFM-000, pg 7-5, para 7.5.3
|
|
|
The TSEC Mode Select Panel RESET Switch, when pressed, performes a power-up restart.
|
False
|
NFM-200, pg 18-69, fig 18-39
|
|
|
Switching capability is provided in the Baseband Control Assembly enabling any of the baseband TX signals and the associated PTT discretes to be rerouted from their designated multiplexers to the ALCS system.
|
True
|
NFM-200, pg 18-261, para 18.4.13.4
|
|
|
When V/UHF#1's mode selector is set to DF, transmit capability is disabled.
|
True
|
NFM-000, pg 2-471, para 2.20.2.2
|
|
|
On the VERDIN Control Unit, switching from Plain to Cipher or Cipher to Plain causes the INPUT DATA indicator on the modulator to flash as a warning that transmitted data may not be encrypted.
|
False
|
NFM-200, pg 18-100, fig 18-56
|
|
|
On the VERDIN Control Unit, switching from Plain to Cipher or Cipher to Plain causes the INPUT DATA indicator on the modulator to flash as a warning that transmitted data may not be encrypted.
|
False
|
|
|
|
Notch filtering in the 17 to 30 kHz band is provided to reject the VLF transmit signal.
|
True
|
NFM-200, pg 18-101, para 18.4.6.8
|
|
|
Which ALCS component processes and demodulates biphase and FSK Peacekeeper status messages?
|
Waveform Converter
|
NFM-200, pg 18-245 para 18.4.12.10
|
|
|
What two units make up the ALCS controller?
|
processor and interface units
|
NFM-200, pg 18-231 para 18.4.12.1
|
|
|
The C2 cabinet is located ______________.
|
at the forward end of comm central, next to the battlestaff area partition
|
NFM-200, pg 18-5, para 18.2.8
|
|
|
With the EXT TRIG SEL switch on the CRO Input Panel set to 60Hz, a 60Hz signal is routed from where?
|
60Hz CONV 1
|
NFM-200, pg 18-64, para 18.4.2.3.3
|
|
|
The KIV-7 is used for EHF transmission and reception and operate in conjunction with the______.
|
BBP
|
NFM-200, pg 18-292 para 18.4.14.3.8
|
|
|
The DAISS subsystem can be reset using the ___________.
|
DAISS RESET button on the UHF C3 Auxiliary Control Panel
|
NFM-200, pg 18-257 para 18.4.13.2/pg 18-258 fig 18-114
|
|
|
The SDU contains a _____, a 24x46 video display, _____, BIT, and a power supply.
|
cpu,speaker
|
NFM-200, pg 18-157 para 18.4.11.4
|
|
|
Which DAISS SSU menu allows the operator to input information to the Attendant Control Unit (ACU)?
|
ENTRY
|
NFM-200, pg 18-157 para 18.4.11.4.1
|
|
|
When setting up Direct Access lines on the Direct Access Selection screen a "BLANK" is entered for a particular Battlestaff station, what does this mean?
|
no privileges
|
NFM-200 pg 18-167 para 18.4.11.4.3.d
|
|
|
What station performs the following "Fire Bill" duties: Take oxygen mask from station regulator and obtain portable oxygen bottle from the port side aft comm central bulkhead. Inspect aft communications central. Return to station and report to ACO.
|
No. 20
|
|
