Related Essays

  • Advantages And Disadvantages Of Arc Welding

    In the process of TIG welding an arc is formed between the tungsten electrode and the metal that needs to be welded. A gas is fed through the torch to protec...

  • The Importance Of Welding Throughout The Bronze And Iron Ages

    Filler rods like magnesium, copper, and aluminum is used in TIG welding. This type of weld helped and made aircraft materials lighter than another type of w...

  • Welding Process

    Pressure (v) gas welding Resistance welding (i) Spot welding (ii) Seam welding (iii)

  • Welding Vs Welding

    Connections are normally made either by bolting or welding. Bolting is common in field connections, since it is simple and economical to make. Bolting is als...

  • Essay On Welding

    The welding rods can vary from brass, copper, cast iron, and stainless steel. All of these rods are made for a different type of

  • Describe The Industrial Welding Process

    Welding There are 5 main types of welding process commonly used in industrial welding. They are; Gas Metal Arc Welding, oxy acetylene, Gas Tungsten arc wel...

  • Yard Mole Removal

    Have you ever been in a welding or metal goods manufacturing factory? If the answer is “yes” then you must have seen various kinds of machines. Among them, t...

  • Why Is Welding Shop Safety Important

    The first priority in the shop was safety, To avoid burns, we wore leather sleeved coats over our clothes. The gloves we wore were thick to avoid getting bur...

  • Welding

    Electrodes (or attachment rods) are available in many alternative sizes and with differing types of flux. The flux is that the protecting coating that 's a...

  • Shuffle
    Toggle On
    Toggle Off
  • Alphabetize
    Toggle On
    Toggle Off
  • Front First
    Toggle On
    Toggle Off
  • Both Sides
    Toggle On
    Toggle Off
  • Read
    Toggle On
    Toggle Off
Reading...
Front

Card Range To Study

through

image

Play button

image

Play button

image

Progress

1/3

Click to flip

Use LEFT and RIGHT arrow keys to navigate between flashcards;

Use UP and DOWN arrow keys to flip the card;

H to show hint;

A reads text to speech;

3 Cards in this Set

  • Front
  • Back

Wire feed systems may be one of these three types

Push, pull, or push-pull

The maximum recommended distance for pushing wire through the cable on a push system is what?

4.5 meters or 15 feet

What drive roll system has the drive rolls mounted in the gun or close to the top

A pull system