Use LEFT and RIGHT arrow keys to navigate between flashcards;
Use UP and DOWN arrow keys to flip the card;
H to show hint;
A reads text to speech;
6 Cards in this Set
- Front
- Back
|
D.S: SATA (Serial Advanced Tech Attachment) |
- Good Transfer rates: - SATA 1:0 transfer data at 1.5 Gbps 2.0 = 3 Gbps 3.0 = 6 Gbps 3.2 = 16 Gbps - Uses own uniqure 4 wire cable - Cable thinner than EIDE to allow better airflow in system and improves overall temp of computer - UNLIKE EIDE CANT CONNECT MORE THAN ONE SATA DRIVE TO CONNECTOR |
|
|
D.S: SCI (Small Computer System Interface) |
- 50 Pins - Use 50 wire ribbon cable to connect - Popular for servers - greater hard disk access and storage needs |
|
|
D.S: EIDE (Enhanced Integrated Drive Electronics) |
- MB Supports it would have 2 EIDE with 40 pins each - Connect drive to connector on MB by using 40 or 80 wire EIDE ribbon cable - Cable typically has 2 connectors on it, one end connects to the drive and other end to the MB |
|
|
D:S: Jumper Switches |
- Set of pins plastic cap over them to create electric connection - Plastic cap contains piece of metal makes contact with pins and create electric circuit - Use jumpers to implement different settings |
|
|
Power Connectors |
- ATX: Supplies 3.3v, 5v and 12v, usually labelled as PI and 24 pin connector. PCIe 6 pin: Supply additonal power to graphic cards |
|
|
USB Ports |
- Device receives power via UBS connection - High speed serial tech that transfer data - Benefits: All USB services use same connector - Supports daisy chaining: connects to more than 1 device - USB hub: Increase no. of USB ports on system - Transfer rates: USB 1.0 - 12Mbps 2.0 - 480 Mbps 3.0 - 5 Gbps 3.1 -10 Gbps |
