• Shuffle
    Toggle On
    Toggle Off
  • Alphabetize
    Toggle On
    Toggle Off
  • Front First
    Toggle On
    Toggle Off
  • Both Sides
    Toggle On
    Toggle Off
  • Read
    Toggle On
    Toggle Off
Reading...
Front

Card Range To Study

through

image

Play button

image

Play button

image

Progress

1/19

Click to flip

Use LEFT and RIGHT arrow keys to navigate between flashcards;

Use UP and DOWN arrow keys to flip the card;

H to show hint;

A reads text to speech;

19 Cards in this Set

  • Front
  • Back

A tool rest on a fix grinder must be?

Set to a maximum of 3mm from the face of the wheel

Which type of radiant energy can cause welding flash?

Ultraviolet rays (uv rays)

Hearing protection should be worn when the noise level is above what decibels?

85 decibels

When oxygen reacts with ultraviolet light from welding, the gas produced is ?

Ozone

What shade of filter plate is recommended for medium amperage gmaw welding?

11

What device breaks the current flow while still at a low level to protect people from electrical shock

Ground Fault Circuit Interrupter(GFCI)

Before entering a vessel to perform any kind of work. You should insist on testing the vessel for ?

Fumes, oxygen levels

When working in a confined space, which, the oxygen level must be between?

19.5-23% by volume

When working in a confined space. It is highly recommended that cutting torches be ignited and extinguished where?

Outside the confined space

Permanent eye damage is in form of cataracts or retinal damage may be caused by over exposure to ?

Infrared light rays

Which poisonous gas can be created for welding around or near chlorinated hydrocarbon degreasers agents?

Phosgene gas ( created by ultraviolet radiation from the welding arc)

Which metal type, when heated or welded , can produce metal fume fever if the fumes are inhaled

Zinc

A load on a scaffold must not exceed what percent of the designed load for the scaffold ?


50%


35%


15%


25%

25%

A vessel that contains fammable substances,fumes, can be made safe by performing what ?

Steaming throughly and welding while it's still hot and full of steam

Hydrogen sulphide gas concentrated as low as 0.07% (700ppm) may cause?

Unconsciousness or death

The first line of defence against welding fumes and gases is?

To weld outside

The employer shall ensure that cylinders containing acetylene are?

Secured in the vertical position

One of the most common workshop hazards are?

Noise level

What must be done where the general public is exposed to harmful welding rays

Put welding screens and signs up