Use LEFT and RIGHT arrow keys to navigate between flashcards;
Use UP and DOWN arrow keys to flip the card;
H to show hint;
A reads text to speech;
10 Cards in this Set
- Front
- Back
who measures the Temp. and pH
|
Engineering Department
& by Medical Dept. as needed |
|
when is Halogen residual (rapid)?
|
Daily
prior to receiving potable water in conjunction w/ bacteriological testing |
|
give the minimum requirement for # of samples to personnel?
|
<400 - 4 samples
400-800 - 8 >800 - 12 |
|
give method of halogen residual "rapid" testing?
|
run water 2 - 3 min
rinse tube fill tube w/ 10ml add appropriate tab remove cap to read (w/in 60sec) |
|
Give method for Bacteriological testing?
|
Allow water flow 2 - 3 min
100 ml add reagent incubate 24 hrs at 35 degrees C |
|
what is the most common Bacterio. test?
|
colilert
|
|
using coliler what does clear mean?
|
Negative
|
|
using coliler what is the difference between yellow and fluorescent yellow ?
|
yellow - positive - total coliforms
Fluorescent yellow - positive - e-coli |
|
When it comes to Maximum contaminant level (MCL)
if >40 samples collected per month no more then _____ may be total coliform positive? |
5%
|
|
potable water logs are maintained for how long and by whom?
|
two years by medical
|