Use LEFT and RIGHT arrow keys to navigate between flashcards;
Use UP and DOWN arrow keys to flip the card;
H to show hint;
A reads text to speech;
13 Cards in this Set
- Front
- Back
|
What are the dimensions of the CFA Heavy Pumper? (Height, Width, Length, Weight and Turning Circle) |
Height: 3.35m Length: 8.15m Width: 2.5m (3m with Mirrors) Weight: 13.2T Operational/ 18.6T Gross Turning: 15.5m Curb to Curb |
|
|
What are the tank capacities of Fuel, Water and Foam tank? |
Diesel 200L Water 2000L Foam 200L |
|
|
What pump is on the appliance and what is the rated capacities? (Low Pressure, High Pressure & Max Flow) |
Godiva WTB-4010 Rear amounted Multi stage pump Low Pressure: 4000L/min @ 1000kPa & 3m Lift High Pressure: 750L/min @ 5500kPa Max Flow: 6200L/min |
|
|
What type of roof monitor is on the appliance? Including Pressure and Flow (min to max) |
TFT Hurricane 700kPa Optimal Pressure 600 - 4700 L/min |
|
|
What ground monitor is on the Mills Tui Heavy Pumper? Including Pressure and Flow (min to max) |
Protek 700kPa Optimal Pressure 360 to 950 L/min |
|
|
What are the 38mm, 64mm and High Pressure Branches? (Type, Optimum PRessure, Flow Rates) |
- Protek 366 38mm: 700 kPa; 115, 230, 360, 475L/min - Protek 368 64mm: 700kPa; 360, 475, 550, 750, 950L/min - Akron 1702 HP: 60m Reel, 3000kPa, 50-230 L/min |
|
|
What is the foam branch and its flow rate? |
Angus 450 Foam Branch 450 L/min 700 kPa |
|
|
What type of primer is on the vehicle? (Including Activation and run time) |
- Positive Displacement Twin Piston Primer - Automatically activates when pressure drops below 150 kPa - 30 seconds maximum run time |
|
|
4 uses of the Mills Tui Heavy Pumper? |
Convey crew of up to 5 operational personnel including the necessary equipment to the fire ground in an urban environment. Pump water from a static supply, street mains, or via the on board first aid tank. Produce B class foam from the on-board tank supply or external source to all deliveries including hose reels, or via the inline inductor to a single hose line. To pump from tank supply utilising the main and second stage pumps with high pressure hose reels.. |
|
|
What fitted and auxillary foam system is on the appliance? |
Fitted: Feecon Around the Pump Proportioner with a metering range of 0 - 10 Auxiliary: Angus 450 Foam Inline Inductor and Branch with metering range of 3%, 6%, 3%AR and 6%AR |
|
Transmission Warning Light What is is and what actions do you take? |
Activated when the transmission oil temperature is too high. Actions: 1) Reduce engine speed 2) Stop the vehicle if necessary 3) Select Neutral 4) Raise Engine RPM until light goes off 5) Notify the DMOs |
|
|
What are the visual and audible low water indicators and when do they activate/deactivate? |
Visual: Amber Strobe on Rear Roof & Indicator light in cab. Activated when first aid tank level drops below 1/4 and deactivates when it returns above 3/4. Audible: When tank falls below 1/4 and sounds for 5 seconds. |
|
|
What are the built in pump protection systems? |
Pressure: Pressure relief valve between the high and low pressure stages of pump. Thermal: Recirculation valve to allow water to flow through the pump back to the tank Thermal: Thermal relief valve operates at 42 degrees, releasing water onto the ground. Caviatation: Pump governor will drop RPM to idle when the increase in RPM causes a decrease in pressure. Caviatation: Priming pump will automatically prime with the pressure drops below 150kPa. |
