Use LEFT and RIGHT arrow keys to navigate between flashcards;
Use UP and DOWN arrow keys to flip the card;
H to show hint;
A reads text to speech;
54 Cards in this Set
- Front
- Back
AFI governing wing structure organization and operation |
AFI 21-101 |
|
How does the maintenance structure meet MAJCOM needs? |
Organizing training and equipping maintenance complexes as if it were in in a time of war. |
|
Most effective maintenance organization structure |
Decentralized structure |
|
2 types of maintenance groups |
Operations group and maintenance group |
|
Who allocates maintenance resources required to meet mission requirements? |
Wing commanders |
|
Who is responsible for maintenance required to ensure balance between sort production and fleet management? |
Maintenance group commanders |
|
Who is responsible to their respective group commanders for overall squadron management? |
Squadron commanders |
|
Who is responsible to the squadron commander for maintenance production? |
Maintenance operations officer |
|
Who is responsible for managing the squadron cannibalization program? |
Maintenance operations officer |
|
Who is responsible for the management, supervion, and training of assigned personnel? |
Aircraft maintenance unit or flight commander |
|
Who directs overall maintenance effort of the unit? |
Production Superintendent |
|
Who tracks all discrepancies identified during red ball maintenance? |
Flightline expediters |
|
What is the function of the maintenance group? |
Support the operations group |
|
What is the role of QA? |
Access, analyze and identify problem areas that may exist, access the quality of training, determine aircraft and equipment condition, and improve reliability and maintainablitly of of aircraft and support equipment |
|
What is a coordinating/facilitating agency that is geared to monitor and support the flightline maintenence effort? |
Maintenence operations center |
|
What type of control does the MOC exhibit when there is more than one squadron involved in aircraft maintenance? |
External control |
|
Who fills the need for a controlling authority outside of the squadrons when more than one squadron is involved in aircraft maintenance? |
MOC |
|
Who makes sure the wing safety office is notified of mishaps involving FOD, other aircraft damage, or injuries resulting during aircraft maintenance? |
MOC |
|
Who preforms many off-equipment tasks that are essential to successful mission accomplishment on the flight line? |
Maintenance squadron personnel |
|
What flight primarily preforms off-equipment maintenance of avionics components and electronic warfare systems? |
Avionics flight |
|
What flight is responsible for nondestructive inspections? |
Fabrication flight? |
|
What publication contain broad, enduring guidance for preparing and employing AF resources to support national objectives? |
AF doctrine documents |
|
What publications are orders of the SAF and contain directive policy statement s to initiate,govern or regulate actions of conduct? |
AF policy directives |
|
Where should procedures or detailed "how-to" instructions not appear? |
Within AFPDs |
|
What are orders of the SAF that will be issued at departmental publications? |
AFIs |
|
What are guidance documents consisting of procedures that usually contain examples for performing standard tasks? |
AFMANs |
|
What adds material to publications issued by higher headquarters or agencies? |
AF supplements |
|
What are informational publications that normally are how-to documents that include procedures for implementing AF policies? |
Pamphlets |
|
What are informational publications that guide research? |
Indexes |
|
What announces processing and rescission actions on air force publications and forms? |
Publishing bulletins |
|
What is MDC? |
The collection, storage, and retrieval of info concerning a mx action or involving personnel assigned to a mx organization |
|
What are overall benefits that base level mx activities can derive from the MDC system? |
Provides a means of managing assigned equipment resources, planning, and scheduling mx and validating and initiating corrective action on mx problems |
|
How is data collected by the MDC system made avaliable to base level maintenance activities |
Through computer listing or I units equipped with IMDS on video terminals |
|
How does MDC info enable depot to reduce the number of spare parts required? |
It provides precise removal and replacement options |
|
What data code allows all phases of a job to be tied together for data analysis? |
JCN |
|
What do the the last 4 digits of the JCN represent? |
Job number |
|
What are the 4 types of work centers that report data to the MDC system? |
Owning, performing, reporting, and non reporting |
|
An on-equipment I'd number is translated by the computer into what types of information? |
Owning workcenter, equipment serial number, part number, MDS or end item WUC, and standard reporting codes |
|
What are support general codes? |
Codes used to identify tasks of a general nature such as cleaning, inspection, storage, ground safety, record keeping, weapons handling, and repetitive shop tasks. |
|
What does the 5 characters of the WUC WUHXN mean? |
WU- type of equipment H- identifies the end item XN- identifies the subsystems or major assemblies and reparablr components within the end item |
|
In what publication can instructions for use of the AFTO form 349 be found? |
TO 00-20-2 |
|
What personnel supplies the priority that is posted in block 7 of the AFTO Form 349? |
Maintenance control |
|
When 1045 is entered in block 17 of the AFTO form 349, what does it indicate? |
The time the specialist is scheduled to begin work |
|
When is an entry required in block 22 of the AFTO Form 349? |
When replacing serially controlled and time change items or when reporting the replacement of items requiring a block 29 entry |
|
What would 1430 in column H of the AFTO Form 349 indicate? |
The time the technician started the job |
|
When 2 technicians complete a job, whose employee number is entered in column N of the AFTO Form 349? |
The senior ranking technician |
|
What form provides a means of controlling items flowing to and from intermediate maintenance shops? |
AFTO Form 350 |
|
What is entered in block 11 of form 350 if there is no part number or data plate? |
The last 9 of the NSN |
|
Under what condition would an entry be made in block 13 of the AFTO Form 350? |
When a part has been ordered from supply |
|
Where is a repair or replaced annotated on the 350? |
In block 15 |
|
Who is responsible for making an entry in block 26 on a 350? |
The activity responsible for returning the item to serviceable status |
|
Quay were the data base management functions of IMDS? |
Data base management, information retrieval and reporting data |
|
What types of data errors are not detected by IMDS? |
One of a kind entries |
|
How are reportings and listing s processed by IMDS? |
By using |