Use LEFT and RIGHT arrow keys to navigate between flashcards;
Use UP and DOWN arrow keys to flip the card;
H to show hint;
A reads text to speech;
108 Cards in this Set
- Front
- Back
Which functions form a maintenance group |
Maintenance operations maintenance aircraft maintenance and QA |
|
To which flight is the engine management section assigned? |
Maintenance operations |
|
Who monitors flying and maintenance schedules and maintains visibility of fleet health indicators? |
Maintenance operations center |
|
What does the fifth position of AFSC 3A652 represent? |
Specific AFSC |
|
What does the fifth position of AFSC 3A652 represent? |
Specific AFSC |
|
What will be your title once you obtain the 7 skill level? |
Craftsman |
|
What does the fifth position of AFSC 3A652 represent? |
Specific AFSC |
|
What will be your title once you obtain the 7 skill level? |
Craftsman |
|
What type of training is provided to help you learn the knowledge portion of your job? |
Career development course |
|
Toxic materials are easiest to get into the body when they are in the form of |
Gases |
|
Who is responsible for providing you with training on how to wear, use, and maintain PPE? |
Supervisor |
|
What would you normally use to clean and sanitize respirators? |
Mild soap |
|
Hazardous waste storage areas must prevent |
Unauthorized entry |
|
Containers holding hazardous waste must be clearly marked to show the contents and |
Date the waste began to accumulate |
|
A specialized function of the supply mission is |
Disposal |
|
From what perspective does the GLSC manage supply? |
Weapons system |
|
Selected equipment items, when returned to depot because of their design characteristics function or application, are predetermined to require |
Overhaul |
|
Which supply document provides a means for organizations to review all document numbers processed during the day by the SBSS? |
Daily document register |
|
Base supply must deliver numerous parts to numerous organizations on a prioritized basis because of the differences in each organization's |
Mission |
|
How many months must you have in the Air Force before you may attend ALS |
48 |
|
What does a completed AFTO Form 350 serve to identify? |
Origin of an item |
|
If you need detailed information concerning codes and entries on the Air Force IMT Form 2005, Issue/Turn-In Request, refer to Air Force Manual |
23-110 |
|
Items that are awaiting parts or maintenance are each required to have an attached DD Form |
1575 |
|
When a bench stock item has a type I shelf life, it means the item |
Has a definite nonextendible period of shelf life |
|
A category 1 deficiency report is used to report a deficiency |
That, if uncorrected, will cause major loss or damage to equipment |
|
Within how many hours must category 1 deficiency reports be forwarded to the originating point? |
24 |
|
Which type of items must be reflected on the Custodian Authorization/Custody Receipt Listing? |
Equipment authorization inventory data |
|
To become an equipment custodian, you must be appointed by the |
Commander |
|
When should new equipment account custodians receive training? |
Before signing for the account |
|
The second section of a TO number gives the |
Model and series for equipment type |
|
AFOSH standards are located within Air Force publication series |
91 |
|
Which TO describes the Air Force TO system? |
00-5-1 |
|
Which type of technical manual is divided into tasks that cover a particular maintenance action? |
Job guide |
|
What section of the IPB contains definitions of the codes used in the IPB? |
Introduction |
|
What TCTO category is issued to correct hazardous safety conditions that can result in a fatality or serious injury to personnel? |
Immediate action |
|
Who originates TOs? |
Equipment manufacturer |
|
An AFTO IMT Form 22, Technical Manual Change Recommendation and Reply, is not submitted for |
Preliminary TOs |
|
Who makes sure the AFTO IMT Form 22 is valid and warrants submission? |
Supervisor of initiator |
|
What are the two classifications of failures in the reliability centered maintenance? |
Potential and functional |
|
In the RCM approach which preventative maintenance task is a scheduled inspection to detect a potential failure condition? |
On condition |
|
Which program integrates hardware software maintenance and diagnostic processes to quantify and monitor/manage engine health? |
Engine Trending & diagnostics |
|
Which piece of PPE is required to avoid potential hazards when lifting heavy objects? |
Safety toed boots |
|
Within the ET&D program, to whom do flight line personnel transfer collected data for analysis? |
Base engine maintenance shop |
|
Which technicians provide maintenance activity data to the ET&D program? |
Propulsion and nondestructive inspection |
|
CRF provide support for whom? |
War fighters |
|
Who maintains accountability of CRF assets and reports their status? |
Production supervisor |
|
Depot maintenance provides support to base level technicians by |
Providing technical assistance and performing repairs beyond their capability |
|
Depot level support includes depot field teams and |
Contract field teams |
|
A primary objective of the engine reporting system is to |
Maintain accurate and timely engine inventories |
|
The key to making the CEMS work is |
Accurate and timely data at the lowest level |
|
You should record the removal and replacement of engine accessories on the following AFTO Forms |
95 |
|
Which is not a Lead the Fleet/Pacer program objective? |
Reducing customer wait time for serviceable assets |
|
Which AFI determines quality maintenance and requires maintenance personnel to display integrity and comply with all written guidance? |
21-101 |
|
How many years ahead should participating units accelerate engines, modules, and accessories? |
2 |
|
Carrying a hand tool in your pocket is potentially hazardous because it could cause |
Injury to you |
|
Prior to starting any maintenance on the aircraft what can you do to ensure that it is safe to proceed? |
Check with other personnel working inside or outside the aircraft |
|
How far does a propeller's axis of rotation extend? |
10ft to the front and 5ft from the rear |
|
In order to avoid the engine exhaust blast, what is the minimum distance to the rear of the aircraft? |
200 ft |
|
FOD is normally caused by |
People |
|
Who has overall responsibility for the FOD program? |
Vice Wing Commander |
|
You should wear eye protection when you work |
With tools that may cause flying particles |
|
What would you use to hold your tools when you cannot locate your toolbox within arms reach? |
Tool bag |
|
If you must torque a sequence of three or more bolts |
Use a staggered sequence |
|
The length of a torque extension is determined by the distance between the center of the square drive and the center of the |
Broached opening |
|
What type of rule should you use for measuring an inside diameter? |
Slide caliper |
|
If you were tasked to measure the clearance between two surfaces, what type of gauge would you use? |
Thickness gauge |
|
The longest calibrated movement between the spindle and anvil of an outside micrometer is |
1 inch |
|
What feature is common to all dial indicators? |
Ability to amplify movement greatly |
|
The Fluke 8025A multimeter control that is used to set the meter to check for AC and DC is the |
Function selector rotary switch |
|
If the input into the Fluke 8025A meter is over the range being used, what will the digital display show? |
OL |
|
What is the maximum voltage that can be measured if the range button is set at 30 on the Fluke 8025A multimeter? |
32 |
|
What is the purpose of a borescope inspection on an assembled engine? |
Visually inspect internal sections |
|
What is the purpose of a borescope inspection on an assembled engine? |
Visually inspect internal sections |
|
Light is transmitted to the tip of a borescope by |
The fiber optics |
|
When operating a borescope, what part of the borescope illuminates the interior of the area you're inspecting? |
Distal tip light guides |
|
Which factor is not considered for borescope operator certification? |
Age |
|
Which factor is not considered for borescope operator certification? |
Age |
|
Which type of borescope misuse causes a poor field of view (black spots)? |
Application of lateral (pinching) pressure to the fiber bundle |
|
The grip length of a bolt should be a few thousandths of an inch shorter than the material it is holding to |
Avoid bottoming out the nut |
|
Which nuts should never be used in areas where the temperature exceeds 250 degrees? |
Nonmetallic self locking nuts |
|
How is a screw length measured? |
Top of the head to the bottom of the screw threads |
|
When installing a self tapping screw, the hole must be |
Slightly smaller than the screw |
|
To prevent damage to the soft metal surfaces and a lock washer is required, what should you use? |
Plain washer underneath the lock washer |
|
What type of pin is used in joints that carry shear loads and where the absence is clearance is essential? |
Tapered |
|
When lock wiring, how many twists per inch are required to produce the proper stiffness? |
8 to 10 |
|
Why is it necessary to carefully remove support clamps when disconnecting tubes? |
Prevents nicking and scratching |
|
Why should dust caps be installed over tube ends rather than inside them? |
Avoids possibility of leaving caps installed |
|
Which type of hose assemblies are exempt from shelf life storage? |
Teflon |
|
What is one method of eliminating hose chafing? |
Use suitable bulkhead type grommets |
|
When you receive an engine in your shop, you should check the applicable forms and then |
Check the compressor inlet |
|
When disassembling the oil filter, why should you always use a clean container? |
To prevent false contaminant indications |
|
Operating procedures and practices that if not strictly observed may result in damage to equipment are shown in the maintenance manuals in the form of |
Cautions |
|
Preservation of a component being shipped is required when it is being returned to depot or stored for more than how many days? |
30 |
|
The requirements for storing engines in a metal container is to maintain |
Nitrogen pressure |
|
What should you use to check for pressure leaks on an engine/module shipping container? |
A soap water solution |
|
To determine whether an engine stored in a shipping container is serviceable or repairable, look on the |
Top half on the right panel of the container |
|
Prior to removing a shipping container lid, what warning must be observed? |
Release all pressure before removing the lid |
|
How many pins secure the adapters to the shipping container support? |
4 |
|
During the "over 180 days" preservation period, the fuel system is maintained full of |
MIL-L-6081 (grade 1010) |
|
Engines inactive for over 180 days must have what accomplished? |
Preservation run and fuel system preservation |
|
When can you consider a depressives engine ready for service? |
Only after a group check run of the engine has been performed |
|
What is used to help remove moisture from an area where engines are stored? |
Dessicants |
|
To dry an engine after water washing a compressor, run the engine for at least |
2 minutes |
|
To dry an engine after water washing a compressor, run the engine for at least |
2 minutes |
|
On the personnel maintenance platforms, the purpose of the platforms safety lock pins is to |
Prevent the platform from lowering while it is in use |
|
To dry an engine after water washing a compressor, run the engine for at least |
2 minutes |
|
On the personnel maintenance platforms, the purpose of the platforms safety lock pins is to |
Prevent the platform from lowering while it is in use |
|
What information is found in Part 1 of an AFTO Form 244, Industrial/Support Equipment Record? |
Item identification |