Use LEFT and RIGHT arrow keys to navigate between flashcards;
Use UP and DOWN arrow keys to flip the card;
H to show hint;
A reads text to speech;
28 Cards in this Set
- Front
- Back
The purpose of cutting lubricant in most drilling operations is to increase the... |
Drilling speed and the drill bit life |
|
What condition would prevent an operator from applying power to a hoist or other powered lifting device? |
An AF form 979 is attached to the unit. |
|
When the MHU-141 Trailer is loaded or towed with the hinges deck panels open, what must be done? |
The deck panel supports must be properly positioned and locked in place with quick release pins. |
|
What kind of movement supports on base activities to or from the flightline? |
Operational |
|
What munitions item is not loaded into transport modules by munitions personnel? |
20 mm |
|
What transport module used for decoy munitions has a maximum capacity of 30 magazines? |
ALE-50 |
|
The purpose of the transport beam beneath the lift arm assemblies on the MJ-1 series lift truck is to... |
Provide added support and to relieve hydraulic pressure from the lift arms when carrying loads for long distances. |
|
Lifting capacity of MHU-83 |
Normal- 7000 lbs With forklift adapter- 6000 lbs |
|
What category or categories are Air Force air compressors classified? |
High and low pressure. |
|
Max amount the MB-4 aircraft towing tractor can tow and push? |
140,000 lbs |
|
Pintle safety locking pins must remain attached to the pintle assembly. |
To prevent an insecure pin from coming out and getting lost. |
|
What gear range should be selected in a tractor with an automatic transmission while going downhill? |
Low range. |
|
What is the purpose of the trailer hand valve (Johnson bar)? |
Test the trailer brakes. |
|
Glad hands used for on tractor/trailer combinations? |
To connect the service and emergency brake airlines from the tractor to the trailer. |
|
Which procedure is not a consideration for backing a tractor/trailer combination? |
Turn toward the passenger’s side |
|
What is the max depth of water you may drive a rough-terrain forklift through? |
5 feet |
|
What is the most beneficial attribute of using the swingmast forklift? |
Allows you to maximize the available storage space. |
|
With the forks level, what is the maximum reach of the variable-reach forklift? |
22 feet |
|
What USAF gun system is loaded and unloaded by the linkless ammunition loading system (LALS) |
The M61A1, 20 mm cannon |
|
Which weapons replaceable assembly of the (LALS) has no moving parts? |
Storage container |
|
Which subassembly of the (UALS) houses a remaining indicator window that provides the means to visually determine the approximate number of rounds in the unit? |
Outer drum. |
|
Which tool can initiate cycling ammunition through the (UALS) replenisher manually? |
1/2 inch speed wrench |
|
Which 30 mm ammo loading system is used to service the GPU-5/A gun pod? |
GFU-10/E |
|
Weight capacity of the MAC and MAC II |
MAC- 4,000lbs MAC II- 6,000lbs |
|
The triple bomb bar is fitted with bomb slings and is used with each hoist to provide for lifting. |
Three 500lbs munitions at a time or two 2,000lbs munitions items. |
|
What is the minimum number of feet required to assemble the A/E32K-3 (MAC), munitions assembly conveyor? |
50x100 feet |
|
Why is it important to monitor (NEW) during a bomb buildup operation? |
If ignited, excessive NEW may cause propagation of an explosive from one location to another. |
|
When packing up the MAC it is important to cap the ends of the air hoses to keep |
Foreign materials from damaging them. |