Use LEFT and RIGHT arrow keys to navigate between flashcards;
Use UP and DOWN arrow keys to flip the card;
H to show hint;
A reads text to speech;
17 Cards in this Set
- Front
- Back
- 3rd side (hint)
|
Which type of archive can you download from CISCO to reinstall all support files for the integrated GUI back to the routers flash? |
.TAR file |
a. .TARfile b. .ZIP file c. .GZ file d. .RAR file |
|
|
Which of the following represent valid command-line interfaces that you can use to manage a CME router? (Choose three.) |
a. Console Connection d, Telnet c. SSH |
a. Console connection b. Cisco ASDM c. Cisco SDM d. Telnet e. SSH |
|
|
Which of the following configuration modes represents the area where you can apply core CME configurations that affect the entire telephony system? |
b. Telephony-service configuration |
a. Dial-peer configuration
b. Telephony-service configuration c. Global configuration d. Voice port configuration |
|
|
Which of the following show commands enable you to see all the Cisco IP Phones that have registered with the CME router?
|
b. show ephone registered |
a. show ip phone registered b. show ephone registered c. show voip registered d. show voice registered |
|
|
Which version of CCP installs into the flash of a Ciscorouter? |
d. CCP Express |
a. There is only one CCP version, which cannot install into the router flash.
b. CCP integrates with the SDM utility in the router’s flash. c. CCP Lite. d. CCP Express. |
|
|
Which of the following is not necessary to configure the CME router to support CCP? |
a. Enabling write operations to the router’s flash |
a. Enabling write operations to the router’s flash b. Creating a level 15 user account c. Enabling HTTP services on the router d. Configuring Telnet or SSH for local logins |
|
|
How does the communication change by selecting the ConnectSecurely checkbox when adding a device to a CCP community? |
c. CCP uses HTTPS/SSH to connect to the device. |
a. You are prompted for the router’s enable secret password rather than the VTY line password.
b. Only level 15 user accounts are permitted to access the device. c. CCP uses HTTPS/SSH to connect to the device. d. CCP permits only communication over an IPSec managed connection. |
|
|
If a Cisco IP Phone not yet configured in CME contacts theTFTP server, which file will be sent? |
a. XMLDefault.cnf.xml |
a. XMLDefault.cnf.xml
b. 000000000000.xml c. A file named after the MAC address of the IP phone d. None of the above |
|
|
What minimum set of telephone-service commands does CME required before it is prepared to accept IP phone registrations? |
a. ip source-address e. max-ephones g. max-dn |
a. ip source-address
b. no shutdown c. ephone d. ephone-dn e. max-ephones f. max-ephone-dn g. max-dn |
|
|
Entering the command ephone-dn 2 from global config mode creates what type of ephone-dn l line type |
a. Single line The "2" is the tag number"dual-line" would create a dual line |
a. Single line
b. Dual line c. Quad line d. Octo line |
|
|
What is the simplest method you can use to have an ephone-dn respond to an internal four-digit extension as well as a ten-digit DID number? |
c. Assign a secondary number using the "number" command
(config)# ephone-dn 1 dual-line(config-ephone-dn)# number 1001(config-epho |
a. Create incoming translation patterns assigned to the dial-peer. b. Use partitions and calling search spaces. c. Assign a secondary number using the “number” command. d. Assign a calling party transformation mask. |
|
|
You want to assign the directory number 1000 (ephone-dn 5) to the third line button on a Cisco 7961 IP Phone (ephone 12). What syntax accomplishes this task? |
d. button 3:5 |
a. button 3:1000
b. button 12:3:1000 c. button 5:3:12 d. button 3:5 |
|
|
You want to verify the line assignment and registration status of the IP phones currently supported by CME. Which of the following show commands provides this information?
|
b. show ephone |
a. show run b. show ephone c. show voip ephone registration d. show voip registration |
|
|
Before CCP enables you to configure any phones or extensions, what component must you configure? |
c. Telephony service |
a. Dynamic routing protocol b. Static route to the CME system c. Telephony service d. Unity express voicemail |
|
|
TRUE OR FALSE? CCP automatically saves changes to flash as you configure them on the router. |
False |
a. True b. False |
|
|
Which of the following is the only required field when adding a user account usingCCP? |
a. UserID |
a. UserID b. First Name c. Last Name d. Password |
|
|
How does CCP link phones and extensions together? |
b. By creating a user account, you can link the user account, phone, and extension together. |
a. By navigating to the Phone configuration page, you can assign extensions to phones.
b. By creating a user account, you can link the user account, phone, and extension together. c. You can assign extensions to phones from the Extension configuration page. d. You must use the command-line ephone/ephone-dn syntax to link phones and extensions together. |
