• Shuffle
    Toggle On
    Toggle Off
  • Alphabetize
    Toggle On
    Toggle Off
  • Front First
    Toggle On
    Toggle Off
  • Both Sides
    Toggle On
    Toggle Off
  • Read
    Toggle On
    Toggle Off
Reading...
Front

Card Range To Study

through

image

Play button

image

Play button

image

Progress

1/90

Click to flip

Use LEFT and RIGHT arrow keys to navigate between flashcards;

Use UP and DOWN arrow keys to flip the card;

H to show hint;

A reads text to speech;

90 Cards in this Set

  • Front
  • Back
force equals mass times:
acceleration.
a force is a:
push or pull.
voltmeters messure:
voltage difference.
multimeters measure:
voltage,amperage,and resistance (in ohms).
what is a form of energy characterized by the vibrating of atoms and molecules.
heat.
thermocouples use how many wires?
3.
thermocouples measure:
temperature.
thermocouples use how many different kinds of metals?
2.
autmopheric pressure is?
14.7 psi.
manometers are used to measure what?
pressure differences.
heat always moves from:
cooler to warmers regions.
i hydrometer measures:
density or specific gravity in liquids.
tw types of fluids are:
hydrualic and pnuematic.
puematic tools use:
gas.
hydraulic tools use:
liquid.
input work performed by an eletrical pump or motor is measured in what?
joules.
the basic unit of electrical is the:
joule.
electrical charge can be calculated by multiplying amperes by what?
time.
a coulomb is equal to what?
6.25 times 10 to the 18th
is there any such thing as linear or angular fluid work?
no.
what is the formula for fluid work?
w=dp*v.
spring scales are used to measure?
input and output force?
the basic english unit of work is the?
foot-pound.
one radian equals?
57.3 degrees.
the cross sectional area of a cylinder can be found by:
multiplying .7854 by the diameter sqaured.
imput work is?
work going into the system.
output work is the?
work is done by the system.
effiency is the output work devided by the pimput work times what?
100.
work equals what?
firce times distance.
in a closed fluid system the fluid is what?
re-used.
a rate is a displacement like quantity devide by:
elapsed time.
velocity is the measure of:
linear machanical work.
velocity is a what?
vector.
what is a vector?
work accompanied by a direction.
speed is similar to:
velocity.
speed is:
scalar.
what is a scalar?
has no directional notation.
units of linear machanical rate are:
foot per second and meters per second.
angular rate is exspressed in:
radians per second or revelutions per mintue.
there are how many radians in one revolution?
6.28.
one revolution is how many degrees?
360.
a stobophere measures?
angular rate?
acceleration is the rate at which speed:
increases or decreases.
units of acceleration are?
foot/second sqaured andmeter/second sqaured.
slowing down is somtimes refered to as:
decelleration,
slding friction must be overcome to:
start an object in motion.
static friction is always greater than what?
kenetic friction.
kenetic friction must be overcome to?
keep an object in motion.
what are materials such as copper and solder the permit the free flow of electrons?
conductors.
what are materails such as plastics and cermics that do not permit the free flow of electrons?
insulators.
laminar flow is the opposite of what?
turbulant flow.
the unit of resistance is the what?
ohm.
fluid resistance is proportional to the length of the?
pipe.
resistors are used to control the amount of what in a circut?
voltage.
friction can be reduced by the addition of what?
lubricants.
the coefficient of friction is the greek symbol:
mew.
the formula for drag resistance is?
R=force devided by velocity.
what is the disruptance of airflow as an object moves throught it?
drag?
what are the two forms of resistance in machanical systems?
drag and friction.
resistance generated by a solid moving through a liquid is known as:
fluid resistance.
energy is the abilty to what?
do work.
energy used to overcome resistance is lost in the form of what?
heat.
what is stored in machanical,fluid,or electrical device by the vitue of change in shape.
potential energy.
energy that an object has becuase it has been lifted against the gravatational pull of earth is what?
gravatational potential energy.
energy that an object has becuase of a temperary change in shape is?
elastic potential enegy.
kenetic energy is the energy of motion posessed by a:
moving body.
an inductor is used to?
store electrcal energy.
idunctance is measured in what?
henries.
electrical current flow is measured in what?
amps.
capasitane is measured in?
farads.
total energy in a system is equal to?
the sum of the potential energy and kenetic energy.
what is the transfer of energy by electromagnetic radiation?
radiation.
what is the tranfer of energy by moveent of a medium?
convection.
conduction is the movement of heat energy from wammer regions to:
cooler regions.
what are the two units of energy?
calories and btu.
power is the rate of?
doing work.
the formula for power is:
P=work/time.
the unifying equation for power (P=work/time) can also be exspressed as what:
P=force times rate.
power is measured in units of what?
foot-pounds/seconds and watts.
one watt is equal to what?
one joule per second.
one horepower is(english):
550 foot-pounds per second.
one horsepower is(SI):
746 watts.
the kilowatt-hour is a unit of what?
energy.
is the kilowatt-hour a unit of power?
no.
one watt equals one volt time one what?
amp.
in fluid systems, power equals what?
pressure difference times flow rate.
P=DP times Qv is the formuls for power in?
fluid systems.
in rotational mechanical systems, power equals?
torque time angular rate.
P=force time rate can also be exspressed as:
P=work/time.
746 watts is equal to 1?
horsepower.