Unrep 2

Front 1

What shall personnel assigned to use velocity, pole type wire rope cutter be trained and certified in accordance with what directive?

Back 1

Opnavinst 8020.14 series, Department of Navy Explosives Safety Policy

Front 2

How shall winch watchers stationed at winches used during replenishment report any malfunction?

Back 2

by blowing the whistle loud until acknowledged by rig captain or winch operator

Front 3

On ships using wire rope rigs for underway replenishment how is each wire rope end secured to the winch?

Back 3

By only one wire rope clip or specially designed clamp that will allows the bitter end of the wire rope to slip free of the drum during an emergency breakaway.

Front 4

When are the explosive charged velocity pole type wire rope cutters used?

Back 4

To cut non -tensioned wire ropes and lines during an emergency breakaway if there is danger to ship personnel or the ships structure.

Front 5

How many explosive charged, velocity type pole type wire cutters are required at each stream solid cargo transfer station on an UNREP delivery ship?

Back 5

2

Front 6

During replenishment when shall preparation be made for an emergency breakaway?

Back 6

Upon receipt of the 1st line

Front 7

What shall remating lines, riding lines and easing out lines be belayed to ?

Back 7

To cleats that are clear of stores and other interferences and are made ready for instant slacking.

Front 8

What size is the easing out line that is to be rigged through spanwire end fitting or long link of the pelican hook?

Back 8

It shall be 12 to 21 thread manila and of suitable length to ease the wire rope clear of the ships side.

Front 9

Markers displaying "EMERGENCY BREAKAWAY" and "DO NOT CUT OR DISCONNECT TENSIONED LINES" SHOULD BE IN WHAT COLOR?

Back 9

red letters on white background, shall be displayed forward and aft each side on the underway replenishment ship

Front 10

If a collision appears to b inevitable, conning officers shall take every possible action to reduce what motion?

Back 10

Relative motion in both lateral and aft directions and decrease the impact angle to minimize damage

Front 11

During an alongside replenishment should a collision occur, what should be done?

Back 11

Institute damage control measures immediately. Maintain watertight integrity and protect explosives and inflammable material from fire. Effect separation with great care to keep damage to minimum.

Front 12

what manual can u refer to when additional details and dimension r required?

Back 12

Underway Replenishment Hardware and Equipment Manual.

Front 13

What wire rope is used in fuel and cargo rigs?

Back 13

Type I, general purpose, Class 3 construction 6 6 by 37 independent wire rope core (IWRC), extra improved plow steel preformed regular right hand lay.

Front 14

What are the 2 types of shackles used in fuel and cargo rigs?

Back 14

Anchor shackles Type IVA class 2 and 3 and chain shackles Type IVB class 2 and 3

Front 15

What r class 3 shackles called?

Back 15

Safety shackles

Front 16

When passing the shot line at night, what is used to illuminate the projectiles?

Back 16

An orange chemical light

Front 17

What color helmet are worn by line throwing gunners?

Back 17

RED safety helments

Front 18

What is the purpose of a shot line bag?

Back 18

It is secured between the nylon shot line and the messenger and is used to return the shot line

Front 19

What action is taken before firing or heaving the lines?

Back 19

The word is passed on both ships over the IMC and or electric megaphone

Front 20

What is the word passed by the firing ship when passing shot lines?

Back 20

:On the (name of receiving ship) stand by for shot lines. All hands topside take cover"

Front 21

What is the main line used to assist in hauling the UNREP messenger and other lines?

Back 21

UNREP messenger

Front 22

What is the preffered location for handling the UNREP meesenger and other lines?

Back 22

Forward and inboard of rig

Front 23

Lines such as the station to station phone and the lead line messenger for the B/B phone/distance line are attached to the messenger at a minimum of what distance?

Back 23

200 feet from the smaller end

Front 24

The spanwire or highline is stopped to the messenger at a minimum of what distance?

Back 24

350 feet from the larger end

Front 25

What forms the bitter end of the messenger?

Back 25

a 5 inch soft eye splice

Front 26

What is the make up of daylight distance markers on the bridge to bridge phone distance line?

Back 26

Colored-cloth nylon coated fabric or painted canvas markers each 8 inches by 10 inches and spaced at 20 foot intervals fro 0 to 300 feet

Front 27

What is the lead line messenger equipped with?

Back 27

A snap hook and has a tag marked "attach zero end bridge to bridge phone distance line"

Front 28

When tending the line, where is the bridge to bridge phone/distance line kept taut?

Back 28

At right angles to the ships centerline in view of the conning officer

Front 29

What are the 2 types of pelican hooks certain fuel and cargo rigs use to connect the spanwire and highline at the receiving station?

Back 29

The 1 inch, fueling at sea light weight pelican hook and the 1 3/8 pelican hook

Front 30

Where is the 1 inch fueling at sea light weight pelican hook used?

Back 30

On the out board end of the spanwire when using either the combines quick release coupling and valve (Robb coupling) or the breakable spool quick release (NATO) coupling

Front 31

Where is the 1 3/8 pelican hook used?

Back 31

To secure the highline to the long link on the receiving station fixed padeye, sliding padeye or pendant. It shall be used with the STREM rig

Front 32

What hardware is used to mount the laser distance billboard?

Back 32

Bulwark mounting hardware

Front 33

How are hand signals used to parallel all orders passed over sound powered phones given?

Back 33

With a 12 inch by 12 inch diameter paddle during the day or with colored wands on flashlights at night

Front 34

What personnel wear green safety helmets?

Back 34

Signalmen