Use LEFT and RIGHT arrow keys to navigate between flashcards;
Use UP and DOWN arrow keys to flip the card;
H to show hint;
A reads text to speech;
25 Cards in this Set
- Front
- Back
TNT Hydraulic Fluid:
|
TNT Mineral Base Hydraulic Fluid
|
|
TNT: How full should the site glass be?
|
1/2 to 3/4 on the site glass
|
|
TNT: When the tool is not being operated the dump valve should be?
|
Kept in a closed position.(Handle away from the hose.)
|
|
TNT: The Dump Valve should be in the open position when ...
|
The tools are connected and ready to be used.
|
|
TNT: Describe the power units that supply power to the TNT tools.
|
4 Horsepower Yanmar Diesel Motor
|
|
TNT: All extrication tools carried on FLFR trucks have a max. working pressure of _______ psi.
|
10,500 psi
|
|
TNT S-100-28 Spreaders: what is the max spreading distance?
|
28 inches
|
|
TNT S-100-28 Spreaders: what is the max. spread force?
|
20,026 lbs of force
|
|
TNT S-100-28 Spreaders: what is the max pulling force?
|
9,840 lbs of force
|
|
TNT S-100-28 Spreaders: what is the weight?
|
54.9 lbs.
|
|
TNT S-100-28 Spreaders: what is the opening and closing speed?
|
open- 9 sec.
close- 5 sec. |
|
TNT: what should you do before making or breking any coupler-couplet connection?
|
Ensure that the hydraulic lines are not under pressure.
|
|
TNT: This tool is equipted with what type of valve to open and close the tool?
|
Deadman Valve
|
|
TNT C-25 Cutter: Max opening distance?
|
6.375 inches
|
|
TNT C-25 Cutter: Max cutting force at the notch?
|
109,098 lbs of force
|
|
TNT C-25 Cutter: Max cutting force at the center?
|
55,000 lbs of force
|
|
TNT C-25 Cutter: weight?
|
41 lbs.
|
|
TNT C-25 Cutter: open and closing times?
|
open- 4 sec.
close- 5 sec. |
|
TNT TLS-50 Ram: weight?
|
46.3 lbs.
|
|
TNT TLS-50 Ram: closed length?
|
21.5 inches
|
|
TNT TLS-50 Ram: open length?
|
50.32 inches
|
|
TNT TLS-50 Ram: Max. 1st push force?
|
51,500 lbs of force
|
|
TNT TLS-50 Ram: Max. 2nd push force?
|
18,500 lbs of force
|
|
TNT: Storage, do you store the tools under pressure?
|
No, always store tools without pressure.
|
|
TNT: Storage, do you store the tools open or closed?
|
Do not store tools in a fully open or fully closed position.
|