Reading...
Play button
Play button
Use LEFT and RIGHT arrow keys to navigate between flashcards;
Use UP and DOWN arrow keys to flip the card;
H to show hint;
A reads text to speech;
25 Cards in this Set
- Front
- Back
|
IF A WORK CENTER IS AUTHORIZED MORE THAN ONE OF THE SAME TOOL CONTAINERS, HOW SHALL THE ADDITIONAL CONTAINERS BE NUMBERED?
|
ENDING WITH A NUMERICAL SUFFIX. (I.E: RDX-950-2-1). THE NUMBER "1" IS WHAT DISTINGUISHES THIS BOX FROM A SIMILAR BOX.
|
|
|
(T OR F?) "CONTAINS TOOLS UNSUITABLE FOR ETCHING" CAN BE STENCILED ON THE OUTSIDE OF A TOOL CONTAINER.
|
T.
|
|
|
(T OR F) TOOL TAGS CAN BE INCLUDED IN TOOL POUCHES.
|
F.
|
|
|
WHY SHOULD TOOL INVENTORY LISTS ALONG WITH SHORTAGE LISTS BE FIRMLY ATTATCHED INSIDE TOOL CONTAINERS?
|
SO THEY DO NOT BECOME A SOURCE OF F.O.D.
|
|
|
(T OR F?) TOOLS FROM PORTABLE CONTAINERS MAY BE CHECKED OUT FOR SIMULTANEOUS MAINTENANCE ON MULTIPLE PIECES OF EQUIPMENT.
|
F. PORTABLE CONTAINERS CAN ONLY BE USED FOR PERFORMING MAINTENANCE ON ONE PIECE OF EQUIPMENT AT A TIME.
|
|
|
(T OR F?) A BROKEN TOOL WITH MISSING PIECES IS TREATED LIKE A MISSING TOOL.
|
T.
|
|
|
WHO DOES THE WORK CENTER IMMEDIATELY REPORT A MISSING TOOL TO?
|
PRODUCTION CONTROL.
|
|
|
WHO PROMPTLY INITIATES A BROKEN/MISSING TOOL REPORT IN THE THE EVENT OF A MISSING TOOL?
|
BY THE INDIVIDUAL REPORTING THE MISSING TOOL.
|
|
|
WHO DOES PRODUCTION CONTROL NOTIFY ONCE A TOOL IS MISSING?
|
MO, AMO, MMCO, AND QA.
|
|
|
WHAT GETS FLAGGED BY PRODUCTION CONTROL IN THE EVENT OF A MISSING TOOL?
|
THE VIDS BOARD GETS FLAGGED TO PREVENT RELEASE OF EQUIPMENT PRIOR TO COMPLETION OF MISSING TOOL INVESTIGATION. WORK CENTER STATUS BOARDS ALSO GET FLAGGED AND PRODUCTION IS STOPPED FOR THE JOB INVOLVED.
|
|
|
IF A PIECE OF EQUIPMENT IS CHECKED OUT TO A SQUADRON AND IS SUSPECTED TO CONTAIN A MISSING TOOL, WHAT SHALL BE DONE?
|
IT SHALL BE TURNED IN ON A WORK REQUEST FOR AN INTERNAL FOD CHECK.
|
|
|
WHO CAN PERFORM AN INTERNAL FOD CHECK ON A PIECE OF EQUIPMENT SUSPECTED TO CONTAIN A MISSING TOOL?
|
CDI OR QAR.
|
|
|
ONCE AN INTERNAL FOD CHECK IS COMPLETED ON A PIECE OF EQUIPMENT, WHAT IS THE PHRASE USED TO IDENTIFY ITS COMPLETION?
|
"CERTIFIED FOD FREE".
|
|
|
WHAT SHALL ACCOMPANY THE ORIGINAL MAINTENANCE MAF ONCE A PIECE OF EQUIPMENT IS DETERMINED TO BE "CERTIFIED FOD FREE".
|
THE HARD COPY OF THE WORK REQUEST.
|
|
|
IF A MISSING TOOL IS NOT LOCATED AFTER SEARCHING, THE QA INVESTIGATOR SHALL SIGN A STATEMENT THAT THE MISSING TOOL INVESTIGATION WAS CONDUCTED AND THE TOOL COULD NOT BE FOUND IN WHAT PART OF THE MAF?
|
IN THE CORRECTIVE ACTION BLOCK.
|
|
|
WHEN IS THE ONLY TIME THE MO CAN RELEASE A PIECE OF EQUIPMENT ONCE A MISSING TOOL OR PART OF A TOOL WHICH IS MISSING, CANNOT BE RECOVERED?
|
AFTER AN INVESTIGATION IS CONDUCTED TO CONFIRM THE MISSING TOOL/TOOL PART IS NOT INSIDE THE EQUIPMENT.
|
|
|
WHERE DOES IT STATE THAT "AT NO TIME WILL SPARE TOOLS BE RETAINED IN WORK CENTERS THAT ARE NOT PART OF THE TCP"?
|
4790.2 VOL 5 CH 13 PAR 13.4.2 (g).
|
|
|
HOW LONG SHALL THE TCP MANAGER MAINTAIN APPROVED TOOL CONTAINER CHANGE REQUESTS ON FILE?
|
1 YEAR.
|
|
|
FOR SHORE AIMDS, WHO MAY THE MO DELEGATE DOWN TO RELEASE EQUIPMENT AFTER AN INVESTIGATION CONFIRMS A MISSING TOOL IS NOT INSIDE A PIECE OF EQUIPMENT?
|
MMCO.
|
|
|
WHAT DOES DRMO STAND FOR?
|
DEFENSE REUTILIZATION MANAGEMENT OFFICE.
|
|
|
ALL HYDRAULIC SERVICING SE WILL BE EQUIPED WITH WHAT FILTER RATING?
|
3-MICRON (ABSOLUTE).
|
|
|
(T OR F?) HYDRAULIC SAMPLES NEED TO BE ANALYZED DURING ACCEPTANCE OF NEW EQUIPMENT?
|
T.
|
|
|
WHAT IS INCLUDED IN THE SE CUSTODY AND MAINTENANCE HISTORY RECORD (OPNAV 4790/51) UPON TRANSFER OF HYDRAULIC SERVICING EQUIPMENT?
|
Hydraulic Contamination Control Trend Analysis Chart.
|
|
|
WHO SHALL REPORT SUSPECTED CONTAMINATED HYDRAULIC SAMPLES TO PC AND QA?
|
WCS.
|
|
|
Inflated and partially inflated tires shall be handled with the same respect and precautions normally applied to handling WHAT?
|
LIVE ORDANDACE.
|
