Use LEFT and RIGHT arrow keys to navigate between flashcards;
Use UP and DOWN arrow keys to flip the card;
H to show hint;
A reads text to speech;
7 Cards in this Set
- Front
- Back
- 3rd side (hint)
VTP Template
|
vlan 100
vlan 200 vtp mode … vtp domain … vtp password … vtp version … |
VTP modes:
• transparent • client • server |
|
Spanning Tree Template
|
spanning-tree mode pvst|rapid-pvst
spanning-tree vlan|mst __ root primary --- spanning-tree mst config instance 1 vlan 1-99 |
|
|
Switch Trunk Template
|
int range fa0/19-20
switch trunk encap dot1q switch mode trunk switch trunk native vlan … switch trunk allowed vlan … channel-group 1 mode ... |
Switchport modes:
• access • trunk • dynamic desireable • dynamic auto Channel-group modes: • on • active (LACP) • passive (LACP) • auto (PAgP) • desirable (PAgP) |
|
Private Vlan Template
|
Steps:
1. Create PIC vlans. 2. Assoc P to IC vlans 3. Config Promiscuous and Host ports |
vlan <501-503>
private-vlan isolated|community ! vlan 5 private-vlan primary private-vlan assoc 501-503 ! int ... switchport mode private-vlan promiscuous switchport private-vlan mapping 5 add 501-503 int ... switchport mode private-vlan host switchport private-vlan host-assoc 5 501 |
|
Port Security Template
|
int ...
switchport mode access switchport port-sec switchport port-sec max __ switchport port-sec protect | restrict | shut switchport port-sec mac-addr sticky switchport port-sec mac-addr __ errdisable recovery cause psecure-violation errdisable recovery interval __ |
|
|
802.1x Authentication Template
|
aaa new-model
aaa authen dot1x group radius aaa authen login NOAAA none line vty | con __ login authen NOAAA dot1x system-auth-control int fa0/1 dot1x port-control auto | force-auth | force-unauth |
|
|
Port Span Template
|
monitor session __ source int __ both | rx | tx
monitor session __ source vlan __ rx monitor session __ dest int __ |
|