Reading...
Play button
Play button
Use LEFT and RIGHT arrow keys to navigate between flashcards;
Use UP and DOWN arrow keys to flip the card;
H to show hint;
A reads text to speech;
13 Cards in this Set
- Front
- Back
|
what are (at least) 4 importain reasons for proper planning to beginning construction of a project
|
measure
scaled sketch research have supplies ready price how to make it |
|
|
3 major pieces of info. that should be included in all well made plans
|
measurement
scaled sketch type of wood |
|
|
process of squaring a board
|
1)crosscut to rough length
2)joint one face of the board 3)plane to thinkness 3/4 4)joint one edge 5)rip it to finish width + 1/16 6) joint second egde ripped on the table saw 7)crosscut one edge 8)crosscut to finished length |
|
|
safty rules
|
wear safty googles
use guards no loose clothing pay attention to what your doing |
|
|
when planing stock describe how to set the proper thickness
|
measure wood then decide the thickness needed. below the planer is a wheel that u turn to adjust to around 1/8 or 1/16
|
|
|
whats the difference between rough length and finished length
|
rough length is no more then an inch of extra wood while finished length is exact measurment
|
|
|
minnimum lentgh of stock put through planer
|
12 inches
|
|
|
what part of the board i susually not run across a jointer
|
end
|
|
|
the blade of the table saw should be set how much higher then the wood itself
|
1/8 or 1.16 of an inch
|
|
|
rules for the jointer
|
1)keep guard over blades at all times
2)never joint something that is less then 10 inches long 3)never joint something that is less then 1/2 in thick 4) dont joint the end grain 5)always wear safty googles 6)always use push stick or push shoe when running the board face down |
|
|
what depth should the jointer be set at?
|
1/16 of an inch
|
|
|
how many blades does the jointer have usually
|
3
|
|
|
what sizes are jointers made in
|
4" 6" 8" 10" 12" 14" 16"
|
