• Shuffle
    Toggle On
    Toggle Off
  • Alphabetize
    Toggle On
    Toggle Off
  • Front First
    Toggle On
    Toggle Off
  • Both Sides
    Toggle On
    Toggle Off
  • Read
    Toggle On
    Toggle Off
Reading...
Front

Card Range To Study

through

image

Play button

image

Play button

image

Progress

1/23

Click to flip

Use LEFT and RIGHT arrow keys to navigate between flashcards;

Use UP and DOWN arrow keys to flip the card;

H to show hint;

A reads text to speech;

23 Cards in this Set

  • Front
  • Back
define "Envelopment"

-3 points
-Sound comes from all around
-No definable point source
- Sense of Space
define "Localization"

-3 points
-Sound comes from a spot
-Sounds are distinguishable
-Sense of position
What is does Bass Management do?
Redirects low end of surrounds to sub
What is Down Mixing?
Reducing surround to stereo
What is the "Film" channel assignment?
L C R Ls Rs LFE
What is the "SMPTE/ITU" channel assignment?
L R C LFE Ls Rs
What is the "DTS" channel assignment?
L R Ls Rs C LFE
"Front" pans between...
L C and R
"Rear" pans between...
Ls and Rs
What are the 3 panning modes?
X/Y > Joystick Style

3-Knob > Pan in straight lines

Auto-Glide > Point 2 Point panning
What is Divergence?
The amount of bleed into neighboring channels.
What are the 2 forms of Center Percentage?
Discrete center or Phantom Center
What does the LFE Slider do?
sends current track to LFE path
Mixing surround and stereo main paths eats up ____ .
DSP
What are the colors of the peak meters and what do they mean??
Green = nominal
Yellow = -6dBFS
Red = clip
Are "SMPTE/ITU" and P&E monitoring specs the same?
YES!
How can system resources be saved?
By assigning sub paths of a main path
Is Phantom Center achieved by setting Center % to 100?
NO
Pro Tools can handle up to how many output channels??
8 or 7.1 Channels
List specs for...
P&E Speaker placement

(4 points)
L/R - 30º
Ls/Rs - 110 - 15º
"Optimum" 135 - 150º
Good localization: front & rear
F/R: pan between ...
Front LCR & Rear LCR
How do u get wide meter view?
Cntrl + Opt + Cmd + click
Name all the clipping indicators.

(4)
Red LED at top of meter
Red track name (TDM only)
Red plug in or send name (TDM only)
Clip LED in plug in window (TDM only)