Use LEFT and RIGHT arrow keys to navigate between flashcards;
Use UP and DOWN arrow keys to flip the card;
H to show hint;
A reads text to speech;
27 Cards in this Set
- Front
- Back
always wear...
|
safety glasses (not cracked or damaged, keep inside ziplock bag)
|
|
wear an ____ (optional)
|
art smock
safety tape on finger tips |
|
never...
|
eat or drink in the studio
|
|
use gloves when...
|
pulling glass out of boxes
|
|
never pull a piece of glass out of a box when....
always.... |
someone is below looking at glass on a lower shelf
look up before standing if you are looking at glass on a lower shelf |
|
Always use gloves to ...
|
push glass completely back in storage boxes
|
|
always hold glass...
|
from the top
|
|
never hold glass...
|
over your head
|
|
never wipe off glass shards from board...
|
with bare hands. use provided brushes
|
|
if you cut yourself...
|
tell Mrs. Richardson so she can disinfect tools, glass, and work area. Rinse cut under running water
|
|
when breaking glass...
|
always use pliers to pull glass down and away from body
|
|
neve leave glass hanging...
|
ff edge of table or counter
|
|
always watch for...
|
wires in the classroom
|
|
never wear...
|
long jewelry, nekties, or clothing that could become caught in moving parts
|
|
never walk away from a grinder...
|
while motor is on
|
|
never turn on grinder while...
|
glass or tools are touching grinding bit
|
|
make sure water reservoir is filled..
|
3/4 full with water
|
|
make sure water does not...
|
pool on table. electrical cord may cause eletric shock
|
|
when soldering, avoid using too much...
|
flux
|
|
do not touch any part of the soldering iron that...
|
is metal
|
|
unravel enough solder on the spool before soldering so that...
|
the solder you are holding in your hand is a safe distance from the solder being melted by the iron
|
|
when removing excess solder from your iron tip...
|
gently tap the tip on the back edge of tinning block while tip is hanging over reservoir on iron stand
|
|
when soldering outer edges of free formed stained glass pieces...
|
make sure fingers are not directly below areas being soldered when holding piece upright
|
|
when attaching hanger...
|
hold ringlet with pliers while soldering
|
|
inspect soldering iron wire cord for...
|
burns through plastic coating
|
|
use ventilation by
|
turning on small fan and aiming in direction of ventilation fan
|
|
at the end of class...
|
put all tools away and brush off table, wash hands thoroughly
|