Use LEFT and RIGHT arrow keys to navigate between flashcards;
Use UP and DOWN arrow keys to flip the card;
H to show hint;
A reads text to speech;
9 Cards in this Set
- Front
- Back
|
Show me how you would check that the direction indicators are working. |
Applying the indicators or hazard warning switch and check the functioning of all indicators. You may need to switch the ignition on, but don't start the engine. |
|
|
Show me how you would check the brake lights are working on this car. |
Operate the brake pedal, making use of reflections in windows, garage doors, etc, or ask someone to help, (you may need to switch the ignition on, prompt not to start engine.) |
|
|
Show me, or explain how you would check that the power assisted steering is working before starting a journey. |
If the steering becomes heavy the system may not be working properly. Before starting a journey there are 2 simple checks. Gentle pressure on the steering wheel, maintained while the engine is started, should result in a slight but noticeable movement as the system begins to operate. Alternatively turning the steering wheel just after moving off will give an immediate indication that the power assistance is functioning. |
|
|
Show me how you would check the parking brake (handbrake) for excessive wear; make sure you keep safe control of the vehicle. |
Apply footbrake firmly. Demonstrate by applying the parking brake so that when it is fully applied it secures itself, and is not at the end of the working travel. |
|
|
Show me how you would check that the horn is working. |
Check is carried out by using control (turn on ignition if necessary.) |
|
|
Show me how you would clean the windscreen using the windscreen washer and wipers. |
Operate control to wash and wipe windscreen (turn on ignition on if necessary) |
|
|
Show me how you would switch on the rear fog lights and explain when you would use it/them. |
Operate switch (turn on dipped headlights and ignition if necessary). Check warning light is on. Explain use. |
|
|
Show me how you switch your headlight from dipped to main bean and explain how you would know the main beam is on. |
Operate switch (with ignition or engine if necessary), check with main beam warning light. |
|
|
Show me how you would set the delisted controls to clear all the windows effectively. |
Set all relevant controls including dan, temperature air direction source, and heated screen to clear windscreen and windows. |
