• Shuffle
    Toggle On
    Toggle Off
  • Alphabetize
    Toggle On
    Toggle Off
  • Front First
    Toggle On
    Toggle Off
  • Both Sides
    Toggle On
    Toggle Off
  • Read
    Toggle On
    Toggle Off
Reading...
Front

Card Range To Study

through

image

Play button

image

Play button

image

Progress

1/16

Click to flip

Use LEFT and RIGHT arrow keys to navigate between flashcards;

Use UP and DOWN arrow keys to flip the card;

H to show hint;

A reads text to speech;

16 Cards in this Set

  • Front
  • Back
What is Rule number one of fire control?
Fire attack must be properly supported
What are some of the supporting operations that must be preformed to allow for safe and effective fire attack?
Size up, command, water supply, stretching the attack line, stretching the back up line, and initiating ear;y ventilation.
What is rule number two of fire control?
There must be adequate water flow to knock down the fire.
What do you want to remember about rule number two?
A lot of water real fast beats a little bit of water over a long period of time .
What is rule number 3 of fire control?
The water must hit the seat of fire
What are the types of nozzle patterns?
What are the advantages and disadvantages that determines when you should and should not use them.
Nozzle Reach=NR Heat Absorption= Highest Steam Conversion=SC Push Potential= PP
Wide fog 60 degree NR- lowest HA- Highest SC-Highest PP- Highest
medium fog 30 degree Medium for all
straight stream- NR-Highest HA-lowest SC- lowest SC- lowest
What is the preferred attack direction ? why ?
Attacking from the unburned side, It contains the fire, protects the occupants, and pushes heat and gases out of the structure
What is often the most practical attack direction on a fire ?
Attacking from the burning side.
What is indirect attack
clockwise circle patter on ceiling 60 degree fog
What is direct attack
Straight at the seat of the fire
What is combination attack?
clockwise Circle pattern ceiling then to the floor
What are some things you should remember about different attack types
1. Each of the attack types have times when they are appropriate.
2. Any attack patter can be used with any attack type.
3. The defining lines between the attack types become blurred in reality.
Define a heat check and when you would use it?
Determines the temperature of the atmosphere, Rapid wide fog patter burst toward upper area of the room
Define penciling and when you would use it?
Used to control heat in heat sinks, Rapid straight stream burst into the corners of the room
Wide fog pattern ( indirect attack)
used to produce maximum conversion of water droplets ( 60 degree),
What is potential energy
The amount of energy stored