Use LEFT and RIGHT arrow keys to navigate between flashcards;
Use UP and DOWN arrow keys to flip the card;
H to show hint;
A reads text to speech;
30 Cards in this Set
- Front
- Back
Circle |
Draw a circle using the center and radius |
|
Circle 3Point |
Draw a circle through 3 points on its circumference |
|
Circle Diameter |
Draw a circle using two diameter points |
|
Circle Tangent,Tangent, Radius |
Draw a circle tangent to two curves with a given radius |
|
Circle Tangent to 3Curves |
Draw a circle tangent to three curves |
|
Circle AroundCurve |
Draw a circle perpendicular to a curve at the chosen point |
|
Deformable |
Draws an approximation of a circle with a defined number of control points |
|
Vertical |
Draw a circle perpendicular to the construction plane |
|
Arc
|
Draw an arc from the center, start, and angle
|
|
Arc : Start, End, Point on Arc
|
Draw an arc from three points
|
|
Arc: Start, End, Direction |
Draw an arc from start point, end point, and the direction from thestart point |
|
Arc: Tangent, Tangent, Radius |
Creates an arc from tangents and radius |
|
Arc: Start End Radius |
Creates an arc from start point, end point, and radius |
|
Convert Output=arcs |
Converts a curve to arc segments that are joined together |
|
Deformable |
Creates an arc shaped non-uniform curve |
|
Extension |
Extend a curve with an arc |
|
Circle |
|
|
Circle 3Point |
|
|
Circle Diameter |
|
|
Circle Tangent,Tangent, Radius |
|
|
Circle Tangent to 3Curves |
|
|
Circle AroundCurve |
|
|
Deformable |
|
|
Vertical |
|
|
Arc |
|
|
Arc : Start, End, Point on Arc |
|
|
Arc: Start, End, Direction |
|
|
Arc: Tangent, Tangent, Radius |
|
|
Arc: Start End Radius |
|
|
Convert Output=arcs |
|