Public Works Transportation Shop’S Supervisor

Front 1

In your work as a PW transportation
shop supervisor, you will come in
contact with which of the following
personnel?

Back 1

Mechanics
Military and civilian equipment
operators
Officers to whom you are
responsible

Front 2

What statement best describes the
work of a public works
transportation maintenance shop?

Back 2

Much of the work is of a
continuing nature

Front 3

Civil service personnel are
employed in a PW transportation
shop for what purpose?

Back 3

To ensure continuity of service

Front 4

the physical layout of a maintenance branch mechanic shop
may be found in which of the
following NAVFAC publications?

Back 4

P-437

Front 5

Respectively, the transportation
division director reports directly
to what person in the chain of
command?

Back 5

The public works officer

Front 6

Within the maintenance branch, who
makes the final decision of
individual personnel assignments?

Back 6

The public works officer

Front 7

In planning equipment required for
the PW center, what person
functions as a technical advisor?

Back 7

The transportation director

Front 8

When the transportation director is
absent, who is in charge?

Back 8

The manager of the equipment
branch

Front 9

To maintain a balanced work flow,
which of the following individuals
coordinates work with other
activities and departments?

Back 9

The manager of the maintenance
branch

Front 10

The production control supervisor
is responsible for receiving,
inspecting, and classifying all new
and used equipment. This
supervisor must also make which of
the following determinations?

Back 10

The parts and tools needed to
support this equipment during
its life cycle

Front 11

Who is responsible for scheduling
the work load for the various
centers of the transportation
department?

Back 11

The production control
supervisor

Front 12

The construction equipment shop
foreman has all except which of the
following responsibilities?

Back 12

Issuing and enforcing safety
practices and fire regulations

Front 13

What is the most important phase of
preventive maintenance?

Back 13

Scheduled, periodic preventive
maintenance

Front 14

What is the first line of defense
against equipment wear, failure,
and damage?

Back 14

Daily inspections by the
equipment operators

Front 15

Your maintenance shop has noted
that the operators are not properly
performing daily PM on their
equipment. To set up training
periods, you should consult with
whom?

Back 15

The equipment operation branch
foreman

Front 16

When a public works station is
short of personnel, what person is
responsible for performing service
station maintenance?

Back 16

The operator

Front 17

Your personnel should inspect
vehicles for safety and
serviceability at intervals not to
exceed 12 months or what maximum
number of miles?

Back 17

12,000 miles

Front 18

When, if ever, should the safety
and serviceability inspections be
performed at the same time?

Back 18

When it reduces downtime

Front 19

Vehicle safety deficiencies were
discovered during a safety
inspection. When should the
deficiencies be corrected?

Back 19

Before the vehicle becomes
operational

Front 20

Unscheduled maintenance is limited
to those items reported or
confirmed deficient by which of the
following personnel?

Back 20

The operator

Front 21

The cost control system provides a
means for comparing the actual
performance of maintenance work on
transportation equipment to the
hourly standards established by
what means?

Back 21

The equipment manufacturers and
the Naval Facilities
Engineering Command

Front 22

In the cost control system, which
of the following costs are charged
to allotments and appropriations?

Back 22

Indirect labor and material
costs of equipment maintenance
and operations
Direct labor and material costs
of equipment maintenance and
operations
Costs of building maintenance,
shop stores, and utilities

Front 23

Reports required by supervisors to
pinpoint deficient areas of
operation are prepared by which of
the following individuals?

Back 23

The accountable fiscal officer

Front 24

T/F Transportation management reports
include data for comparing actual
maintenance costs and standard
maintenance costs.

Back 24

True

Front 25

The extent of the services a PW
maintenance shop provides in
maintaining, repairing, or
overhauling an activity’s
automotive equipment depends on
which of the following factors?

Back 25

Economics
Distance of the activity from
commercial repair shops
Size of the activity

Front 26

T/F cost of repair services by the
preventive maintenance shop must be
justified when the nature of the
work is classified.

Back 26

False

Front 27

Guidance for equipment preservation
is contained in what NAVFAC
publication?

Back 27

P-434

Front 28

The level of preservation to be
applied to construction equipment
depends on which of the following
factors?

Back 28

1. Information received as to how
the equipment is to be handled,
shipped, and stored
2. Conditions to which the
equipment will be subjected
during its storage period
before issue
3. Physical characteristics of the
equipment

Front 29

Before applying preservatives to
CESE, which of the following
actions must you take?

Back 29

Remove all corrosion and
contaminants

Front 30

What single cleaning method, if
any, is the best for all equipment?

Back 30

None

Front 31

Steam cleaning is suitable for the
removal of which of the following
substances?

Back 31

1. Tar
2. Heavy grease
3. Road deposits

Front 32

T/F Active storage equipment must be
operated for short periods of time
at regular intervals to keep it in
serviceable condition.

Back 32

True

Front 33

When depreserving stored equipment
before it is operated, you should
take all except which of the
following actions?

Back 33

Remove preservatives with
abrasives

Front 34

In addition to safety inspection
regulations, what rule applies to
vehicle inspection and servicing?

Back 34

Perform as prescribed by the
manufacturer

Front 35

At a public works department, the
PM schedule for a vehicle is
determined by dividing the
estimated miles and hours by what
factor?

Back 35

The number of workdays per year

Front 36

The emissions control devices
should be serviced at what maximum
number of miles?

Back 36

12,000 miles

Front 37

T/F Direct labor is the only factor to
be considered when maintaining a
work load control board.

Back 37

True

Front 38

Which of the following means may be
used by a maintenance shop to
display the work load status
effectively?

Back 38

A work load control board

Front 39

When standard hours are compared
with actual man-hours, which of the
following factors is indicated?

Back 39

Possible lack of training for
personnel

Front 40

A public works department may have
a contract repair parts supplier to
increase availability.

Back 40

True

Front 41

In an undermanned public works
station, the supervisor may need to
take which of the following actions
to keep up with the maintenance and
repair schedule?

Back 41

1. Hire additional personnel
2. Use commercial contractors
3. Extend working hours

Front 42

In ordering work to be performed by
commercial contractors, you should
use what form?

Back 42

DD Form 1155

Front 43

After the inspector adds the labor
rate, contract number, order
number, and accounting data, the
shop repair order is forwarded to
what person?

Back 43

The contracting officer

Front 44

Upon completion of contract
repairs, what should the shop
dispatcher do with the custody
receipt?

Back 44

Destroy it

Front 45

The DD Form 1155 should be filed in
the equipment history jacket for
what period of time?

Back 45

The life of the vehicle

Front 46

The period of time a vehicle is
warranted is found in what document
or publication?

Back 46

The procurement contract

Front 47

Equipment deficiencies should be
noted on which of the following
forms?

Back 47

SF 368

Front 48

Procedures for submitting a quality
deficiency report for a special
operating unit of the Naval
Construction Force may be found in
which of the following NAVFAC
publications?

Back 48

P-404

Front 49

T/F If action has been completed
correcting an equipment deficiency,
a quality deficiency report is not
required.

Back 49

False

Front 50

Regardless of warranty coverage,
which of the following actions
should you take with CESE that have
design deficiencies affecting safe
operation?

Back 50

Remove the CESE from service
immediately

Front 51

Warranty repairs are normally
completed by what means?

Back 51

A franchised dealer

Front 52

The efficiency of a public works
activity is normally increased
after a visit by a representatives
from what activity?

Back 52

TEMC

Front 53

Upon the departure of the visiting
TEMC representative, he or she will
submit a report to what individual
person?

Back 53

The commanding officer

Front 54

For sites with more than 50 pieces
of CESE, transportation assistance
visits are made at what intervals?

Back 54

Every 18 months

Front 55

When disposal of CESE is requested,
you must submit what form to the
cogizant TEMC?

Back 55

SF-120

Front 56

When CESE is turned in to DRMO,
what is done with the vehicle
history jacket?

Back 56

It is turned in to DRMO with
the equipment

Front 57

Special disposal instructions for
ambulances and dental vehicles are
contained in which of the following
NAVFAC publications?

Back 57

P-300

Front 58

After a disposal action is
completed, what action, if any,
should you take next?

Back 58

Adjust the inventory records