Use LEFT and RIGHT arrow keys to navigate between flashcards;
Use UP and DOWN arrow keys to flip the card;
H to show hint;
A reads text to speech;
62 Cards in this Set
- Front
- Back
Zoomer Tool Modes
p.151 |
Normal Zoom
Single Zoom |
|
Single Zoomer tool does what???
p.151 |
lets you do one zoom and then selector tool to let you keep working
|
|
Hot key to select zoom tool and to toggle through zoom modes:
p.151 |
F5
|
|
Marquee Zooming allows you to
|
zoom in horizontally and vertically at the same time by dragging to select the portion of a track that you with to enlarge
|
|
how to marquee zoom
p.152 |
with zoom tool command click and drag
|
|
To fill the edit window with current edit selection (horizontal Zoom)
press p.152 |
Option+F
|
|
The trim tool offers four moeds
|
Standard
TCE Scrub Loop Trim |
|
Note that repeatedly resampling a region can cause the audio quality to
p.152 |
Degrade
|
|
When using the TCE trimmer mode, changing the length by large amounts can cause ...
p.152 |
undesirable audio artifacts
|
|
to change TC/E settings go where?
p.g.153 |
Setup>Preferences
Processing Tab |
|
Scrub Trim Tool is only available in
p,.153 |
PT HD and LE with DV toolkit 2
|
|
Scrub Trim Tool
|
Allows you to scrub then trim when you found the spot you want to trim by scrubbing.
|
|
can you scrub trim on two tracks at the same time
p,153 |
yes
|
|
Manually reverse the direction of the scrub trim icon by pressing
p.153 |
Option
|
|
Where is the scrub tool playback routed to
p.153 |
through the track signal path
so you hear any effects applied |
|
Hot key for trim tool and toggling through the different trim tool modes
p.153 |
F6
|
|
To scrub with finer resolution (without having to zoom in) while scrubbing, press:
p.154 |
Command
|
|
positioning with the loop tool
p.154 |
top part of region : loop tool functionality
Bottom part of region: trim tool functionality |
|
To change the number of loop iterations in a loop-trimmed region
p.155 |
drag loop trim tool at top of region.
|
|
Loop trim tool
To change the length of loop iterations p.155 |
drag standard trim tool along bottom.
Number of looped iterations will increase or decrease |
|
While using selector tool you can temporaily switch to scrub tool by holding down
p. 155 |
CTRL
(for finer resolution add command) |
|
when using scrubber tool you can activate shuttle mode temporarily by pressing
p.155 |
CTRL+OPTION
|
|
The grabber tool has three modes
p.155 |
Time (default)
Separation object |
|
Separation Grabber does what?
p.g.155 |
moves edit slections of regions to new locations or other tracks
can also duplicate selections by Option Dragging |
|
You can use the object Grabber Tool to:
p.g.156 |
select Non-contigous Regions on one or more tracks.
|
|
object grabber is not available when the edit mode is set to:
p.156 |
Shuffle or Spot
|
|
Hot key for grabber tool
and toggling through grab tool modes p.157 |
F8
|
|
The object grabber ignores what type of groups when making selections
p.157 |
Edit Groups
|
|
Smart Tool
press any two of the three keys p.157 |
F6 through F8
|
|
Smart tool allows instant access to what tools
p.157 |
Selector Grabber and Trim tools
and also instant fade capability |
|
Activating the Smart Tool Functions
Selector Tool: p.157 |
Upper half of a region, not near boundary
|
|
Activating the Smart Tool Functions
Trim Tool: P.158 |
center of a region horizontally and within 12 pixels of a region boundary
display of a region must be 36 pixels wide for trim tool to be available |
|
Activating the Smart Tool Functions
Grabber Tool: p.158 |
Lower Half of a region and not near a Region Boundary
|
|
Activating the Smart Tool Functions
Smart Tool Fade Mode: p.158 |
Upper quarter of Region Boundary with in twelve Pixel Boundary.
|
|
Activating the Smart Tool Functions
Smart Tool Cross Fade mode: p. 159 |
Close to Bottom if two adjacent regions
|
|
Smart Tool Fade Rules:
Default fade Settings p.159 |
defaullt fade settings last chosen in the Editing Preference Page will be used.
|
|
Smart Tool Fade Rules
if a fade or Cross Fade already exist on that Boundary fade mode... p.159 |
Fade mode will not be available
|
|
Smart Tool Fade Rules
All fades you create will be graphically drawn on screen and stored in the p.159 |
Fade file stored with the session Folder
|
|
Smart Tool Fade Rules
Can you trim Fades using the standard trim tool p.159 |
Yes You Can!
|
|
key command fro strip silence
ch6 p.g.161 |
Command + U
|
|
the strip button
in strip silence ch.6 p.g.162 |
removes silence
|
|
the extract button
in the strip silence ch.6 p.g.162 |
extract leaves only silence
|
|
where is auto fades enabled
ch.6 p.g.163 |
Setup>Preferences and Operation Tab
|
|
auto fade length goes up to
ch.6 p.163 |
10 milliseconds
|
|
auto-fades are processed in
ch.6 p.g.162 |
Real-Time
|
|
The time operations window includes pages for the following commands:
ch.6 p.g.163 |
-Change Meter
-Insert Time -Cut Time -Move Song Start |
|
where to open time operations window
ch.6 p.g.163 |
Event>Time>Operations Window
|
|
Key Command for Time Operations Window
ch.6 p.g.163 |
Opt+[1]
|
|
Time Operations
with Change Meter you can p.g.163 |
you can
-enter meter changes at a particular bar, - make a meter change, over a selected area of time, -add meter changes sequentially one bar at a time |
|
Time Operations
Insert Time lets you p.g.164 |
insert an amount of blank time (silence) into conductor rulers,MIDI and Instrument Tracks, and audio tracks
|
|
Time Operations
Cut time allows you to |
cut a specified amount of time (both timebase and track data) from conductor rulers,MIDI and instrument tracks, and audio tracks.
|
|
To place a region at the location of a region boundary
p.g.170 |
Slip Mode
use grab tool click on region that will be moved and control click on region you want to move too |
|
To align a regions sync point.
p.g.170 |
grab tool
Shift+Control Click on region with sync point |
|
to realign a regions end to another region boundary
p.g. 171 |
command + control click
|
|
maintain alignment while moving regions among tracks
p.171 |
control-drag
|
|
you can only use the region alignment method on single regions only
true or false p.g. 171 |
true
|
|
to add a sync point to a region
p.170 |
Command+
|
|
To trim a region's start point by the nudge value
p.g.172 |
-configure the nudge value
-time grab region -Option and [+] and [-] |
|
To trim a region's end point by the nudge value
p.172 |
-configure the nudge value
-time grab region -Command and [+] and[-] |
|
Key command to enable key command focus
p.g.172 |
Command + Option + 1
|
|
To nudge by next nudge value
p.g.172 |
enable key command focus or hold Control
-selector or time grab tool -press forward slash(/) to nudge forward -press M to nudge backward |
|
to nudge contents of a region
p.g.173 |
-time grab select region
-Control key and Plus [+] or minus [-] on numeric key pad |