Use LEFT and RIGHT arrow keys to navigate between flashcards;
Use UP and DOWN arrow keys to flip the card;
H to show hint;
A reads text to speech;
3 Cards in this Set
- Front
- Back
- 3rd side (hint)
Comparison of Plastics: Thermoplastics vs Thermosettings |
- Formed by Polymerisation: Addition/Condensation -Linear w/ No Cross Links/ 3D w/Number of Cross Links -Monomers: bifunctional/poly functional -Molecular Weight: Low/High -Soft, Weak, Less Brittle/Hard, Strong, More Brittle -Solubility in Organic Solvents: Yes/No -Examples: PVC, PVA/Phenolformaldehyde, Nylon 6:6 |
On the basis of Polymerisation, Cross Links, Monomers, Molecular Weight, Physical Properties, Solubility, Examples. |
|
Compounding of Plastics: |
Binders (Resins) - Hold Constituents together Fillers/Extenders - impart better tensile strength, hardness, finish, workability, opacity etc. Pigments/Dyes Catalysts/Accelerators Plasticizers - increase the plasticity Lubricants - Impart flawless ness, glossy finish Stabilizers - improve thermal stability |
|
|
Fabrication/Moulding of Plastics |
Compression, Transfer - Thermosets Injection, Extrusion - Thermoplasts |
|