• Shuffle
    Toggle On
    Toggle Off
  • Alphabetize
    Toggle On
    Toggle Off
  • Front First
    Toggle On
    Toggle Off
  • Both Sides
    Toggle On
    Toggle Off
  • Read
    Toggle On
    Toggle Off
Reading...
Front

Card Range To Study

through

image

Play button

image

Play button

image

Progress

1/29

Click to flip

Use LEFT and RIGHT arrow keys to navigate between flashcards;

Use UP and DOWN arrow keys to flip the card;

H to show hint;

A reads text to speech;

29 Cards in this Set

  • Front
  • Back

Metering valve water supply piping size

1/2"

Diaphragm and piston valve minimum supply piping size?

3/4"

Washer style faucet work by

Compression against a fixed or replaceable seating area

Washer style faucet components

Three types of flush valves

Piston, diaphragm, metering

Flush valves for water closets are only

Piston and diaphragm

Water closet flush valve minimum water supply size

1"

Why are flush valves installed with a vacuum breaker

To prevent cross connection

When you increase flow you decrease

Pressure

When you increase pressure you decrease

Flow

Minimum of operating pressure of piston and diaphragm valve

15 psi (100 kpa) - maximum of 80 psi (100 kpa)

Flush valve flush time should be between _-_ seconds

3-5 seconds

High pressure meter

Inlet pressure + 13.57


_______________________


14.7

Diaphragm vent limiting device

2.5 ft3/hr methane - 1 ft3/hr propane

Max diaphragm size low pressure

6"

What does gas vent suppresor do?

Slows fluctuations of diaphragm

Service regulator pressures

7" wc to max of 2psi

System regulator pressures?

Gas pressure where the gas pressure is higher than the appliances

How many propane regulators are needed

2

Max propane first stage pressure

10 psi

Propane second stage regulator purpose

Bring psi from first stage to building pressure

Another name for propane second stage regulator

System regulator

ID and OD if flush tank discharge piping

1" ID and 1 1/4" OD

Do trap seal primers have an air break?

No

Hot water in a house should be set to what tempurature

120F or 49C

Category 1 appliance

78-83% efficient


Venting is non positive (uses buoyancy)

Category 2 appliance

Greater than 83% efficient


Venting non positive (buoyancy)

Category 3 appliance

78-83% efficient


Positive venting

Category 4 appliance

83% + efficient


Positive venting