Related Essays

  • Hydraulics Case Study

    gear assy. Parts, rear axle assy. Parts and engine etc) are brought in the logistics area. These parts are given by different vendors set by the company. • ...

  • Copper Gta Welding

    Hot cracking is located at the surface and inner part of the welds, as shown in Fig. 18. The surface crack rate is 25.1% and the section crack rate is 51.3%,...

  • Windsor Machines Case Study

    The objective of over project is increase the twin screw and twin barrel life against wear for extrusion machinery. Company Profile ABOUT...

  • Hardness Test Lab Report

    Medium Carbon Steel 71.0-112 6. AlSl 800 Steel 102 7. Tungsten Alloy 32.0-110 8. Silver Alloy 35.0-102 9. Materion Brush

  • Case Study Of Split Die

    3.3.3 Selection of Die Angles The split die was designed for the ease of assembly for fabrication. AISI 52100 steel was selected as the material for the di...

  • Analysis Of Knuckle Joint

    Cotter joint A cotter is a pin or wedge passing through a hole to fix parts tightly together. In British usage cotter pin has the same meaning, but in the U...

  • Akebono Braking

    Foundation brakes signify essential components relating to the control of brakes, except for operative parts, such as disc brakes, drum brakes, parking brake...

  • Ball Joint Project

    Materials: The materials we used for this project were Ball joint replacement kit or the Ten80 kit. Procedure: The steps we took to do th...

  • The Functions Of Brakes

    6. The brakes should need little maintenance. 7. Brakes, when applied must not disrupt steering geometry. 8.

  • Automatic Door Mechanism Report

    As a result, we can see an object looks like a door. I have applied the same process on the other wheel as well, and as you see, I am going to attach them to...

  • Shuffle
    Toggle On
    Toggle Off
  • Alphabetize
    Toggle On
    Toggle Off
  • Front First
    Toggle On
    Toggle Off
  • Both Sides
    Toggle On
    Toggle Off
  • Read
    Toggle On
    Toggle Off
Reading...
Front

Card Range To Study

through

image

Play button

image

Play button

image

Progress

1/3

Click to flip

Use LEFT and RIGHT arrow keys to navigate between flashcards;

Use UP and DOWN arrow keys to flip the card;

H to show hint;

A reads text to speech;

3 Cards in this Set

  • Front
  • Back

What side will be welded on?

Arrow side fillet

What side are you welding on?

Arrow and other side. V cut

What side will be welded on?

other side with a U groove