• Shuffle
    Toggle On
    Toggle Off
  • Alphabetize
    Toggle On
    Toggle Off
  • Front First
    Toggle On
    Toggle Off
  • Both Sides
    Toggle On
    Toggle Off
  • Read
    Toggle On
    Toggle Off
Reading...
Front

Card Range To Study

through

image

Play button

image

Play button

image

Progress

1/55

Click to flip

Use LEFT and RIGHT arrow keys to navigate between flashcards;

Use UP and DOWN arrow keys to flip the card;

H to show hint;

A reads text to speech;

55 Cards in this Set

  • Front
  • Back

Rollover protection must peform at this temp

0 degreed F

Hierchary of Controls

Engineering, Administrative and PPE

Practice of connecting two metal objects to prevent static discharge

Bonding

Repetitive and similar task require briefings at start of each shift

Subpart V

Gaurd rail top rail

42 +/- 3 inches

Scaffold erection/dismantling

Must be supervised by competent person

Construction safety standard

1926

Fall protection required when working on a scaffold

Over 10 feet

Signed OSH Act into law

Nixon

OSH Act created

1971

Crane operators must be

Certified

Limited access zone must be the height of the wall plus

4 feet

Industrial truck training requirememts are found in

1910.178 Powered Industrial Trucks

Scaffold cross braces may serve as a mid rail when

20 to 30 inches above platform

Standard for eye and face protection

ANSI 87.1

Standard for respirators

1910.134

Responsible to train signal person

Employer

When signal are interrupted between signalman and operator

Safely stop operations

Defective portable ladders must be

Removed from service

Has the authority to refuse to handle crane loads

Crane operator

Prior to each shift

Rigging must be inspected

Type A soil

May be sloped at 1/2:1 when depth is less than 12 feet

Days worker was only able to work a partial shift

Classified as restricted work activity

Accident prevention and warnings signs must be

Visible

Height at which masonry walls must be braced

8 feet or greater

After showing credentials an OSHA inpection includes


OSHA inpection includes

Opening conference, walk around inspection closing conference

Minimum clearance of hanrails between rail adn wall

3 inches

Soil having a compressive strength of 1.2 tons pers square foot

Type "B" soil

Ladder must be designed such that they ccan support

4 times the max load

Material chutes must be enclosed when

Greater than 45 degrees

Maximum height at which a controlled decking zone may be used

30 feet

Maimum voltage before gaurding is required

Greater than 50 volts

Creating employer failed to inform employees

Creating employer recieves a citation under the multi-employer citation policy

Max deceleration distance

3.5'

Person with a recognized degree or professional standing

Qualified person

Maximum distance to a fire extinguisher

100 feet

Number of incidents per 100 full time employees per year

OSHA incident rate

Leadership should always

Be an example by knowing and complying with rules

Hand and power tools

Maintained in a safe condition

When mechanical equipment is used on a roof

Warning lines must provide a safe distance of 10 feet

Welding opertations should be this when practical

Shielded

Failure to remove grease on regulator fitting could result in

An explosion

Two main components of an employer health and safety program

Safety and health programs and competent person inspections

Employer are responsible to

Maintian accident prevention programs

Used when a condition is not covered by a specific standard

Horizontal standards

OSHA mission


OSHA mission

Protection the safety and health of workers

OSHA requires an employer abate

All cited violations

Protection of workers rights and guard against retaliation

Section 11 (c) of OSH Act

Toxic to male and female reproductive systems

Lead

Ensure a worker is trained in first aid and willing to render aid

When no medical facilities are in the vicinity

Product of workplace illness and injury

Reduce morale and increase training costs

Portable drinking containers

Must have a tight lid and tap

Ensure consistent implementation of OSHA standards

Purpose of directives and enforcement

Fall protection must

Ensure a freefall of less than 6ft

Assured grounding programs

Not a part of a buildings permanent wiring