Use LEFT and RIGHT arrow keys to navigate between flashcards;
Use UP and DOWN arrow keys to flip the card;
H to show hint;
A reads text to speech;
23 Cards in this Set
- Front
- Back
|
Employers and Owners |
|
In a complex site, structural engineers,geo-tectnical engineers,riggers and crane manufacturers representatives may all need to be involved in a? |
site analysis |
|
the combination of ____ can severely damage the suspension of the crane |
Rough roads and crane weight |
|
when determining whether or not there is adequate access, you must consider the level, grade,and ___ of the roadways. |
compaction |
|
when setting up a lattice boom crane, one consideration is having enough space ____. |
to fully extend the boom on the ground |
|
it is important that ___ understand all aspects of crane setup, site preparation and site |
Operator |
|
the methodical process that attempts to identify hazards and devise plans to overcome or eliminate all hazards which may interfere with crane operations is reflected in the ____ |
Site analysis |
|
when in doubt of the surroundings at a crane site, it wise to consult with the____ about the exact location of possible hazards |
local utility company |
|
During transport and setup, the ____ of a crane can break through the ground and cause damage. |
Wheels and crawlers |
|
when a signal person raps on his hard hat with their fist you should? |
Use the main hoist |
|
what minimum clearances required between the counterweights and any obstruction, |
2 feet |
|
pinch point clearance ensures that. o one will be inadvertently trapped or crushed and that _____ |
clearance is provided for the crane as the lift is being conducted. |
|
what will happen if a crane is not set up within 1% of level |
crane stability will be negatively impacted |
|
trenches, cellars, embankments, flowing water and standing water all have a direct effect on the ____? |
compaction and ground |
|
standby cranes shout be inspected at ____? |
Semiannually |
|
when you are performing your daily PM check you notice that there is a pool of oil under your crane. you should_____? |
note it on your report and check with your supervisor |
|
when operating near power line you should use _____ to avoid hitting them |
signal person |
|
when load rotation may be hazardous a _____ should be used. |
tag line |
|
during lift operations what is the ANSI B30.5 minimum clearance from overhead power lines rated at 60kV? |
15 feet |
|
the minimum required clearance from over head power lines tated at 345kV for a crane in transit is ? |
16 feet |
|
measures and displays the weight of the load being hoisted |
load indicator |
|
used solenoid-operated blocking and bypass valves |
selected control lock out system |
|
measures how far the boom is extended |
boom length sensor |