Use LEFT and RIGHT arrow keys to navigate between flashcards;
Use UP and DOWN arrow keys to flip the card;
H to show hint;
A reads text to speech;
14 Cards in this Set
- Front
- Back
|
Ashley Regis EDA012915 07-01-15 |
Ashley Regis EDA012915 07-01-15 |
|
|
Equipment and |
Supplies |
|
|
1.Bite registration cartridge material |
... |
|
|
2. Cartridge dispensing gun |
... |
|
|
3. One cartridge syringe tip |
... |
|
|
4. one intraoral tip |
... |
|
|
Procedure Steps |
.. |
|
|
1. Ensure the patient is sitting in an upright position. Ask the patient to close her back teeth together.Tell the patient that thus how you need her to close with the bite registration material in place.Observe how both sides of the arches occlude |
... |
|
|
2.Place the bite registration material cartridge in the dispensing gun. |
... |
|
|
3.Dispense material onto the occusal surface of the patient arch starting in the posterior molars on one side and continuing to syringe the material onto the anterior teethe and around to the molars on the opposite side. A full arch bite registration will ensure an accurate occlusal record. |
... |
|
|
4.have the patient close her mouth or guide the patients jaw into the proper position. |
... |
|
|
5.Most vinyl polysiloxane bite registration materials will set in 20 to 30 seconds |
... |
|
|
6. remove bite registration from the mouth. rinse the material dry and disinfect according to manufactures instructions . |
... |
|
|
7.Be sure to avoid contact with any chemicals know to inhibit setting of vinyl polysilxane such as latex gloves and acrylic residues.wear vinyl gloves during this procedure. |
... |
