Use LEFT and RIGHT arrow keys to navigate between flashcards;
Use UP and DOWN arrow keys to flip the card;
H to show hint;
A reads text to speech;
19 Cards in this Set
- Front
- Back
Portion of the grip that is placed in the palm of the shooting hand |
Backstrap |
|
Provides a path for the fired bullet |
Barrel |
|
On a Smith & Wesson revolver; it is the spring-loaded part that holds the cylinder closed |
Center Pin |
|
Attaches the cylinder to the frame so the cylinder can swing in and out of the frame opening |
Crane |
|
Houses the extractor rod and contains the chambers that hold the cartridges |
Cylinder |
|
Disengages the cylinder from the frame |
Cylinder release latch |
|
Locks the cylinder |
Cylinder Stop |
|
Star-shaped device attached to the extractor rod that fits inside the cylinder that the rounds rest on (internal part) |
Extractor |
|
When depressed, it causes the extractor to push the cartridge from the cylinder |
Extractor Rod |
|
Internal structure that holds the parts of the revolver and provides a way of gripping the firearm |
Frame |
|
Located on the end of the barrel near the muzzle; it is designed for the swift location of the target and for bringing the firearm into alignment for accuracy |
Front Sight |
|
Made of wood, plastic, or rubber; designed to allow the shooter to grip the firearm easily for control |
Grip |
|
When the trigger is pulled, this part falls forward to activate the primer |
Hammer |
|
Pin or firing pin - part of the hammer used for cocking the weapon to single-action mode |
Hammer Spur |
|
Part of a revolver that turns the cylinder as the gun is cocked, thus aligning a cartridge with the hammer or firing pin (internal part) |
Hand |
|
Located on the rear of the frame; is can be adjustable or fixed |
Rear Sight |
|
Part of the frame that houses the rear sight, positioned over the cylinder |
Top Strap |
|
Activates the revolver's operation in both single and double action |
Trigger |
|
Part of the frame that protects the trigger |
Trigger Guard |