• Shuffle
    Toggle On
    Toggle Off
  • Alphabetize
    Toggle On
    Toggle Off
  • Front First
    Toggle On
    Toggle Off
  • Both Sides
    Toggle On
    Toggle Off
  • Read
    Toggle On
    Toggle Off
Reading...
Front

Card Range To Study

through

image

Play button

image

Play button

image

Progress

1/33

Click to flip

Use LEFT and RIGHT arrow keys to navigate between flashcards;

Use UP and DOWN arrow keys to flip the card;

H to show hint;

A reads text to speech;

33 Cards in this Set

  • Front
  • Back
  • 3rd side (hint)
in a star topology. a single connection failure will halt all traffic between all sites.
false
true or false
dial up ISDN does not convert a computer digital signal to analog between transmitting them.
True
true or false
ATM is a wan technology that functions in the data link layer
true
true or false
Sonnet simplifies framing and multiplexing at the physical layer
true
true or false
PBL has the best max throughput available
false
true or false
wans typically send data over ________ available communications network.
public
the individual graphical location connected by Wan are known as ___________?
wan links
because wan connection requires a router to connect locations their network carries are not capable of having ________ protocols
nonroutable
most modern wans. a ring topology relies on ______ rings to carry data.
redundant
a _________ wans are most types of wans because they provide most routes of data.
mesh
the _____ incompliences the intire phone system wires to network carries that connect different regions of a country.
PSTN
a __________ is a place where the telephone company terminates lines.
C O
a __________ connection is one in which a user computer by a modem and stays connected for a period of time.
dial up
a portion of a ps10 that connects any residents or business to the nearest CO is ____________.
local loop
________ means that a telpohne company connects residence using fiber optic .
FITH
________ Is an updated digital version of x25 that refers on packet switching.
frame relay
the process called ______ 2 64 KB. isd channel B can be combined to a throughput to 120kb.
bonding
a PRI uses ________ b channels and one 64kb D channel.
23
the speed of the T1 carrier depends on its _________ level
signal
customers D mark point inside or out the building RJ connectors terminate in a ________.
smartjack
a _______ arrogates multiple DSL sub lines and connects them to the carrier CO.
DSLAM
broadband cable requires mama sub to share the same local line. raising concerns about ________ and actually throughput.
security.
What sets ATM apart from Ethernet?
fixed packet.
a sonics ______ results from using double ring tech instead of fiber optic.
fault tolerance
the data rate of a perticular sonic ring is indicated By its ________. which is recognized.
optical carrier level.
a ________ connection between nodes that are logical and appear to be direct dedicated links between those nodes.
virtual circuits.
_________ uses tdm over two wires to devise signal channels into multiple channels.
T carrier.
________ encapsulates incoming Ethernet and converts them into ATM cells for transmission over atm network.
lan emulation
a __________ node synchronize communication can receive data by looking at the time on the clock.
receiving
a ________ combines individual sonic signals on the transmitting end and the other multiplexer seperates combined signals on the receiving end.
multiplexers
contained sites that are connected in a star or ring formation that are interconnected at different levels being organized
tiered.
occurs when data travels from the carries switching facility to the customer is ________
downstream
occurs when each site is no longer
bus