• Shuffle
    Toggle On
    Toggle Off
  • Alphabetize
    Toggle On
    Toggle Off
  • Front First
    Toggle On
    Toggle Off
  • Both Sides
    Toggle On
    Toggle Off
  • Read
    Toggle On
    Toggle Off
Reading...
Front

Card Range To Study

through

image

Play button

image

Play button

image

Progress

1/45

Click to flip

Use LEFT and RIGHT arrow keys to navigate between flashcards;

Use UP and DOWN arrow keys to flip the card;

H to show hint;

A reads text to speech;

45 Cards in this Set

  • Front
  • Back
To report serial number 23NCI16 over the sound-powered telephone circuit, you would report the serial number in what way?
1. Too, three, november, charlie, india,
wun, six
2. Too, tree, november, charlie, india,
wun, six
3. Two, tree, november, charlie, india,
wun, six
4. Two, tree, november, charlie, india,
wun, sics
2. Too, tree, november, charlie, india,
wun, six
It’s important for you to remember that the mouthpiece and earpiece of sound-powered telephones are interchangeable for which of
the following reasons?
1. Two people can talk at once
2. They can be interchanged if a piece breaks
3. Undesirable noises can be fed into the
system
4. Both 2 and 3 above
4. Both 2 and 3 above
The headset of sound-powered telephones is picked up as a unit for which of the following reasons?
1. To make sure you have all the parts
2. To avoid breaking them
3. Both 1 and 2 above
4 In case the earpiece is missing
3. Both 1 and 2 above
When using the mouthpiece of a
sound-powered phone set to report contacts,how far from your mouth should you position the mouthpiece?
1. 1/2 to 1 inch
2. 1 to 2 inches
3. 2 to 3 inches
4. 3 to 4 inches
1. 1/2 to 1 inch
Why should you unplug a phone’s headset
when it’s not in use?
1. To keep the user costs down
2. Earpieces will pick up noise and transmit it over the circuit
3. Carbon will build up at the connectors
4. Calls from other circuits won’t go through
2. Earpieces will pick up noise and transmit it over the circuit
Aboard ship, there are how many categories of shipboard sound-powered phone circuits?
1. One
2. Two
3. Three
4. Four
3. Three
What category of shipboard telephone circuits is designed to maintain vital communications and are preceded by the letter X?
1. Primary system
2. Auxiliary system
3. Supplementary system
4. Command circuit
2. Auxiliary system
Which of the following sound-powered phone circuits is used as the CO’s battle circuit?
1. JA
2. JC
3. JL
4. 1JV
1. JA
To keep the meaning of a message intact when standing duty as a telephone talker, what action should you take?
1. Speak loudly
2. Repeat the message word for word
3. Paraphrase what you hear
4. Speak rapidly to transmit the message quickly
1. Speak loudly
Which of the following statements is a rule for circuit discipline?
1. Transmit only official messages
2. Keep the button in the OFF position when
not transmitting
3. Use only standard words and phrases
4. All of the above
4. All of the above
Which of the following elements is included when taking a message?
1. Name of caller
2. Message
3. Time and date
4. Each of the above
4. Each of the above
The IVCS has which of the following
components?
1. Terminals
2. Accessories
3. ICSCs
4. All of the above
4. All of the above
Within the IVCS, what is the purpose of the ICSCs?
1. To perform switching actions
2. To keep lines clear
3. To give multi-access to lines
4. To ensure automatic cutoff for
security purposes
1. To perform switching actions
Which of the following shipboard announcing systems is called the general announcing system?
1. 1MC
2. 2MC
3. 3MC
4. 4MC
1. 1MC
Which of the following shipboard announcing systems is used for intership communications?
1. 5MC
2. 6MC
3. 7MC
4. 8MC
2. 6MC
Which of the following shipboard announcing
systems is used for hangar deck damage
control?
1. 39MC
2. 51MC
3. 53MC
4. 58MC
4. 58MC
Which of the following persons is authorized to pass calls over the 1MC?
1. OOD
2. XO
3. CO
4. Each of the above
4. Each of the above
What is the purpose of the 20MC announcing system?
1. Radio room announcing system
2. Flag officer’s command announcing
system
3. Combat information announcing system
4. Captain’s command announcing system
3. Combat information announcing system
Which of the following types of flags and pennants is/are used by the Navy?
1. Substitute flags
2. Numeral pennants
3. International alphabet flags
4. All of the above
4. All of the above
Aboard ship, a man overboard is indicated by what emergency/warning flag?
1. Code Alfa
2. Oscar
3. November Charlie
4. Bravo
2. Oscar
What administrative flag is used to recall
all personnel to the ship?
1. Hotel
2. Juliett
3. Romeo
4. Papa
4. Papa
What administrative flag is flown in port to indicate the ship has ready duty?
1. Hotel
2. India
3. Romeo
4. Quebec
3. Romeo
When under way, the national ensign is
normally flown from what location?
1. The gaff
2. The aftermast
3. The flagstaff
4. The jackstaff
1. The gaff
Which of the following statements defines the term “colors”?
1. Colors give recognition of codes
2. Colors consist of our national ensign along with the union jack
3. Colors are lights on the flagstaff
4. Colors are the flags of foreign ships
2. Colors consist of our national ensign along with the union jack
When a naval ship is in port or at anchor, the union jack is flown from what location?
1. The gaff
2. The jackstaff
3. The aftermast
4. The flagstaff
2. The jackstaff
The U.S. Navy flag is flown in which of the following situations?
1. At official ceremonies or official public gatherings when the Navy is officially a participant
2 In parades
3. In official Navy occasions
4. Each of the above
4. Each of the above
Which of the following flags are half-masted
at the death of the CO?
1. National ensign
2. Union jack
3. Commission pennant
4. Each of the above
4. Each of the above
On small ships, personnel from what watch are responsible for hoisting and hauling down absentee pennants?
1. Security watch
2. Quarterdeck watch
3. Roving watch
4. DC central watch
2. Quarterdeck watch
On large ships, what person is responsible for making sure that special flags or pennants are
displayed to indicate changing events aboard ship?
1. Boatswain’s mate
2. Quarterdeck watch
3. Duty signalman
4. Topside watch
3. Duty signalman
Where is a list of special flags and pennants normally posted as a ready reference for watch standers?
1. Combat information center (CIC)
2. After deck
3. Quarterdeck area
4. Half deck
3. Quarterdeck area
An officer in command entitled to a personal flag is embarked in a boat on an official mission. Where should the pennant be flown?
1. Amid ship
2. In the bow
3. In the stern
4. Yardarm, port
2. In the bow
You are manning the sound-powered telephone in a repair locker. DC central calls and wants the
serial number of the P-100 pump (23DBCX14)in your repair locker. How should you say this number over the phone?
too, tree, delta, bravo, charlie, xray, wun, fo-wer
The mouthpiece and earpiece of a
sound-powered phone are interchangeable.True or False
True
If you pick up the mouthpiece or the headpiece by itself what could happen
delicate wires could break.
To talk or listen through the phone, what should be done?
To talk or listen through the phone, depress the button located between the transmitter and receiver.
The three categories of sound powered phone circuits are—
a. Primary
b. Auxiliary
c. Supplementary
An XJZ circuit is what kind of circuit
An XJZ circuit is an auxiliary circuit.
The primary system includes
The primary system includes all circuits necessary for controlling armament, engineering, damage control,
maneuvering, and surveillance functions during battle.
These circuits are designated JA through JZ.
Auxiliary circuits are separated as much as possible from primary circuits.
Circuit designations are
the same as the primary system, preceded by the letter X
(XJA, X1JV, and so on).
The supplementary system,
X1J through X61J,what action should you take to talk or listen
through the phone?
All auxiliary and
supplementary circuit designations are preceded by the
letter X, but supplementary circuits are easily identified as
such because they have no letter after the letter J.
What are the components of the sound-powered telephone?
mouthpiece(transmitter)
headband
earpiece
Junction Box
Breastplate
Yoke
Push-Button
Which of the following sound powered phone circuits is used as the COs battle circuit
1. JA
2. JC
3. JL
4. 1JV
1. JA
To clear a sound-powered phone circuit to transmit an important message, the sender should say
“silence on the line.”
The proper response upon receipt of a message is
“Repeat message, identify yourself,
and then acknowledge the message.”
The terminal devices used with the IVCS are
a. Network
b. Dial