• Shuffle
    Toggle On
    Toggle Off
  • Alphabetize
    Toggle On
    Toggle Off
  • Front First
    Toggle On
    Toggle Off
  • Both Sides
    Toggle On
    Toggle Off
  • Read
    Toggle On
    Toggle Off
Reading...
Front

Card Range To Study

through

image

Play button

image

Play button

image

Progress

1/16

Click to flip

Use LEFT and RIGHT arrow keys to navigate between flashcards;

Use UP and DOWN arrow keys to flip the card;

H to show hint;

A reads text to speech;

16 Cards in this Set

  • Front
  • Back

What document is used to collect man hours and EMT expanded by the work center controlling the inspection and is the only look phase MAF used to collect SCIR data?

INSPECTION CONTROL

What is the maintenance time when no work is being performed by any work center involved in the inspection?

AWM

What is when any work center involved in the inspection is AWP and no work is being performed by any work center involved in the inspection?

SUPPLY TIME

What is used to document the removal and replacement of repairable components while performing on equipment repair?

MAF

In the event a flight safety discrepancy is repaired while airbone a designed what shall inspect the repairs after return to home base?

QAR

Unscheduled corrosion prevention is documented on the MAF only when the relapsed maintenance time exceeds what?

ONE HALF MAN HOUR

What documents are used when personnel are permanently or temporarily assigned to the check crew?

LOOK PHASE DOCUMENTS

Maintenance actions in support of the aircraft preservation process fall into how many general categories?

FOUR

Initial preservation is applied within the time frames listed in what or the applicable MRCs?

NAVAIR 15-01-500

What is a complete renewal of the initial preservation and is done when a specified length of time has elapsed from the initial pres date?

REPRESERVATION

What MAF is also used by reporting custodians for planning workload and material requirements and for configuration accounting?

TD COMPLIANCE

What is considered to be the end item when work is performed on engines except for TD compliance at the O level maintenance activity?

AIRCRAFT

When a complete engine is being turned in for a TD compliance what will be entered in the discrepancy block?

PSSN

What inspection is conducted by O level maintenance personnel to determine any degradation or damage that may have occurred during a mission and will be documented on a MAF?

POSTLAUCH REHABILITATION

Look phase documents are not issued for D level. Therefore what is not currently used and is reserved for future use?

WORK CENTER X43

What repair by COMNAVAIRSYSCOM FS activities of aircraft damaged beyond the repair capability of ACCs maintenance activities?

IN SERVICE REPAIR. ISR