Reading...
Play button
Play button
Use LEFT and RIGHT arrow keys to navigate between flashcards;
Use UP and DOWN arrow keys to flip the card;
H to show hint;
A reads text to speech;
35 Cards in this Set
- Front
- Back
|
Which of the following is a public IP address?
A. 10.0.0.1 B. 62.10.1.1 C. 172.16.0.1 D. 192.168.1.1 |
B
|
|
|
Which of the following ports MUST be open to connect to a PC using RDP?
A. 21 B. 80 C. 443 D. 3389 |
D
|
|
|
Which of the following is the MAXIMUM transfer speed of USB 2.0?
A. 100 Mbps B. 400 Mbps C. 420 Mbps D. 480 Mbps |
D
|
|
|
Which of the following display connections has 15-pins?
A. RGB B. VGA C. DVI D. HDMI |
B
|
|
|
Which of the following connector types is only used for Coaxial?
A. RJ-11 B. ST C. F D. RJ-45 |
C
|
|
|
Which of the following cable types has the MAXIMUM transfer rate of 1 Gbps?
A. CAT3 B. CAT5 C. CAT5e D. CAT6 |
C
|
|
|
Which of the following features of Windows allows a device to have a default IP address if a DHCP
server is not available? A. APIPA B. ARP C. IPv6 D. DNS |
A
|
|
|
Which of the following wireless standards is backwards compatible with 802.11g?
A. 802.11a B. 802.11b C. 802.11n D. 802.1q |
C
|
|
|
Which of the following types of RAM can be used in a dual channel configuration?
A. SDRAM B. RAMBUS C. DDR D. DIMM |
C
|
|
|
Which of the following is the BEST protocol to use for securely transferring large files?
A. Telnet B. SSH C. SFTP D. FTP |
C
|
|
|
Which type of fire extinguishing technology should be used when encountering an electrical fire?
A. Class B fire extinguishers B. Overhead sprinkler system C. Water-based fire extinguishers D. Non-water based extinguishers |
D
|
|
|
Which of the following will provide the BEST protection against power failures and data loss?
A. Auto-switching power supply B. Uninterruptible power supply C. Line conditioner D. Surge suppressor |
B
|
|
|
Which of the following tools are commonly used to remove dust and debris from inside a
computer? (Select TWO). A. Cotton and alcohol B. Vacuum C. Compressed air D. Anti-bacterial surface cleaner E. Feather duster |
B,C
|
|
|
Which of the following is the BEST way to explain RAID to a non-technical user?
A. “RAID is a dynamic logical disk management system.” B. “RAID uses multiple hard disks to increase performance and/or provide protection against data loss.” C. “RAID uses data striping to reduce hard drive write time and parity bits to reconstruct the data from a failed hard drive.” D. “RAID stands for Redundant Array of Independent Disks”. |
B
|
|
|
Which of the following is representative of a class C address type?
A. 10.15.1.4 B. 169.254.125.15 C. 172.20.15.5 D. 192.168.1.15 |
D
|
|
|
A client wants a technician to install more RAM on their graphics workstation. The client has
provided a 4 GB SODIMM and had problems installing it. Which of the following is the probable reason for this? A. Graphic workstations require flash memory B. The memory is incompatible for the workstation C. Graphic workstations require solid state memory D. The workstation has no available memory slots |
B
|
|
|
Which of the following MUST be performed when installing a PCI sound card for use instead of the
onboard sound? A. Install drivers B. Install additional memory C. Configure the jumpers D. Flash the BIOS |
A
|
|
|
Which of the following hard drive types would be considered the MOST likely to survive a fall?
A. SCSI B. Solid State C. IDE D. SATA |
B
|
|
|
Which of the following are the MOST important factors to address when a technician is choosing
the components for a CAD workstation? (Select THREE). A. Large drive space allocation B. Powerful sound card C. Multiple network cards D. Multiple large HD monitors E. Powerful video card F. Maximum RAM G. Powerful processor |
E,F,G
|
|
|
Which of the following is the speed limitation for CAT3 wiring?
A. 1 Mbps B. 10 Mbps C. 100 Mbps D. 1000 Mbps |
B
|
|
|
If a technician is trying to remote into a computer through a firewall, which of the following ports,
by default, MUST be forwarded? A. 21 B. 25 C. 110 D. 3389 |
D
|
|
|
Which of the following wireless network standards provides the FASTEST throughput?
A. A B. B C. G D. N |
D
|
|
|
Which of the following allows a technician to enable support for a USB 1.1 device?
A. MBR B. HCL C. BIOS D. AGP |
C
|
|
|
Which of the following connectors from a power supply should be used with a graphics expansion
card? A. 8-pin 12 volt B. PCIe 6-pin C. 20-pin D. SATA |
B
|
|
|
An end user requires a computer to support computer aided drafting and computer aided
modeling. Which of the following component packages should a technician recommend to the end user? A. Powerful processor, high-end graphics card, and maximum RAM B. File streaming, printer sharing, and a RAID array C. Surround sound audio, compact form factor, HDMI output D. Processor and RAM that meets minimum Windows requirements |
A
|
|
|
After installing a bar code reader, which of the following is commonly done to configure the
reader? A. Scan in program codes B. Enable the code reader in the BIOS C. Use Device Manager to enable I/R ports D. Adjust jumper switches |
A
|
|
|
Which of the following expansion slots would support the HIGHEST transfer speeds for high-end
graphics cards? (Select TWO). A. PCIe B. AGP 8x C. PCI D. ISA E. AGP |
A,B
|
|
|
Which of the following represents a connector that supports the connection of external devices?
(Select TWO). A. IEEE1394 B. eSATA C. EIDE D. SATA E. IDE |
A,B
|
|
|
Which of the following are the MOST important considerations when configuring a PC that will be
used for a CAD / CAM workstation? (Select TWO). A. Gigabit NIC B. HDMI output C. Maximum RAM D. Powerful processor E. High end audio output |
C,D
|
|
|
Which of the following input devices allows multiple PCs to share a common display?
A. Router B. Bridge C. KVM D. Wireless keyboard |
C
|
|
|
Which of the following connectors would be found on a twisted pair cable?
A. RJ-45 B. BNC C. SC D. ST |
A
|
|
|
Which of the following allows for the FARTHEST transmission distance for data?
A. Bluetooth B. Single-mode fibre C. RG-6 cable D. CAT6 cable |
B
|
|
|
The helpdesk technician has been tasked to reinstall the OS on a desktop and has already
inserted the OS install disk in the CD-ROM. Which of the following would MOST likely need to be configured within the BIOS to continue reinstalling the OS? A. BIOS password B. Flash BIOS for firmware upgrade C. Boot sequence D. Clock speeds |
C
|
|
|
A user is requesting assistance in building a custom made PC for home theater use to connect to
their existing large LCD screen. Which of the following components should MOST likely be recommended? (Select TWO). A. Large IDE hard drive B. HDMI output C. Dual monitors D. RAID array E. TV tuner |
B, E
|
|
|
Which of the following devices might need drivers installed so that it can be recognized by the
operating system and function properly? A. Speakers B. Monitors C. Scanners D. Projectors |
C
|
