Use LEFT and RIGHT arrow keys to navigate between flashcards;
Use UP and DOWN arrow keys to flip the card;
H to show hint;
A reads text to speech;
13 Cards in this Set
- Front
- Back
- 3rd side (hint)
You are in charge of installing 200 twisted pair cable drops. What wiring standard should you most likely use? |
568B |
|
|
You have a 120 Meter Twisted Pair Cable attaching 2 hosts. The data reaching the intended host is compromised and degraded. What issue is the host experiencing? |
Attenuation |
According to IEEE 802.3 standard twisted pair cables have a maximum rated length of 100 Meters. Past this length, loss of data is highly probable. Measured in Db |
|
What is the broadcast name of the WAP known as? |
Service Set ID or SSID |
|
|
a Wireless Bridge can connect 802.11 standards together. What mode is this known as? |
Bridge Mode |
Example: 802.11A, B, G, N, AC |
|
What are the 5 wireless standards of 802.11? |
802.11A 802.11B 802.11G 802.11N 802.11AC |
IEEE 802.11 is a set of media access control (MAC) and physical layer (PHY) specifications for implementing wireless local area network (WLAN) computer communication in the 2.4, 3.6, 5, and 60 GHz frequency bands. |
|
What cable is used to directly connect similar devices together? |
Crossover Cable |
|
|
What cable is used to connect a computer to a router? |
Straight Through Cable or Patch Cable |
|
|
Category 6 Cable Speed (Cat 6) |
1000 Mbps+ |
Category 6 cable, commonly referred to as Cat 6, is a standardized cable for Gigabit Ethernet and other network physical layers that is backward compatible with the Category 5/5e and Category 3 cable standards. Compared with Cat 5 and Cat 5e, Cat 6 features more stringent specifications for crosstalk and system noise. |
|
You are trouble shooting a network connectivity problem. Which command would you use to display the ports on which a computer is listening? |
netstat |
|
|
You are troubleshooting a network connectivity problem. Which command would help you resolve name resolution issues? |
nslookup |
|
|
You need to determine the MAC address of a Windows computer. Which command should you use? |
ipconfig /all |
|
|
You are troubleshooting a network connectivity problem. Which command is a route tracing tool which combines the functionality of Ping and Tracer |
pathping |
|
|
You are troubleshooting a network connectivity problem. Which command would you use to display NetBIOS protocol statistics? |
nbtstat |
|