Use LEFT and RIGHT arrow keys to navigate between flashcards;
Use UP and DOWN arrow keys to flip the card;
H to show hint;
A reads text to speech;
13 Cards in this Set
- Front
- Back
Front (Term) |
- Seals - Raceways - Rolling elements - Outer ring - Inner ring - Cage |
|
Identify the following bearings: |
- Cylindrical thrust - Four point contact ball - Deep groove ball - Spherical roller - Taper roller - Thrust ball |
|
Which bearing would require the least amount of radial space ?
Needle bearing or Deep groove ball bearing |
Needle bearing |
|
What has a greater contact area ?
Ball bearing or Roller |
A Roller bearing, because it has the greater surface contact area. |
|
What does the taper designation K represent ? |
The taper on the inner race 1:12 |
|
Which of the following bearings would have the highest radial load capacity ?
A. Single row tapered roller B. Single row deep groove ball C. Double row spherical roller D. Internally self-aligning ball |
C. Double row spherical roller |
|
Which shield type limits max speed ? |
Rubbing seal |
|
Which of the following bearings are designed to handle misalignment ?
CARB, Cylindrical roller, deep groove ball bearing, spherical roller, self-aligning ball bearing, double row angular contact bearing |
- CARB - Cylindrical roller - Spherical roller - Self- aligning ball bearing |
|
What is corrected to ensure proper fit of a bearing? |
Shaft or the housing fit |
|
What is the type of bearing that has a designation that begins with a 7 ? |
A Single row angular contact ball bearing |
|
What is the extra # in a 5 digit code for ? |
It represents the width series |
|
A bearing designation ending with (02) would have a inner bore of ? |
02 = 15 mm |
|
Which bearing arrangement would be considered the most rigid ? |
Back to back |