Mil Req For 3Rd & 2Nd Class Ch. 7

Front 1

How many digits in the NSN designate the
FSC?
1. 2
2. 4
3. 9
4. 13

Back 1

(2) The first 4 digits of the NSN make up the
FSC. In 5330 00 010 4960 the first 2 digits of
the FSC are called the FSC group, and the last
2 digits are called the class.

Front 2

What is the most common number used to
identify material?
1. Navy item control number
2. Local item control number
3. National stock number
4. NATO stock number

Back 2

(3) All material purchased and maintained by
the federal government is maintained by
national stock number.

Front 3

Is the cognizance symbol a part of the
national stock number?
1. Yes
2. No

Back 3

(No) Although NOT part of the stock number,
the cognizance symbol may be prefixed to the
stock number in some supply publications.
However, the cog symbol is not prefixed to
the stock number on supply documents,
forms, and records.

Front 4

Which of the following items would require a
SMIC?
1. Office supplies
2. Firefighting equipment parts
3. Parts designed for nuclear plants
4. Aircraft engine parts

Back 4

(3) Items specially designed, manufactured,
and tested for use in nuclear reactor plants,
which require special handling, machining,
and so forth before being installed and used
require a SMIC.

Front 5

The COSAL is both a technical and supply
document.
1. True
2. False

Back 5

(1) Its technical nomenclature operating
characteristics, technical manuals, and so
forth are described. It is a supply document
in that the COSAL provides a complete list of
parts required to operate and maintain the
equipment.

Front 6

Cryptographic, or cryptologic items are listed
in the ML-N.
1. True
2. False

Back 6

(2) The ML-N omits cryptographic and
cryptologic items which are listed in security
classified catalogs produced by the respective
DoD agencies.

Front 7

MILSTRIP is used for which of the following
transactions?
1. Requisitioning material
2. Issuing material
3. Cancellation of material requests
4. All of the above

Back 7

(4) As the name implies, MILSTRIP is used
for all transactions from requisitioning of
material to issuing the material.

Front 8

Which of the following forms is/are used to
order material?
1. DD Form 1348
2. DD Form 1348-6
3. DD Form 1149
4. All of the above

Back 8

(4) All of the listed documents are MILSTRIP
requisitioning documents used to order
material.

Front 9

If the NSN is not available for a repair part,
what form should you use to requisition the
part?
1. NAVSUP Form 1250-1
2. DD Form 1348
3. DD Form 1348-6
4. DD Form 1149

Back 9

(3) The bottom section of the DD Form
1348-6 permits the inclusion of all available
technical or descriptive data. This data will
assist the supply source in the identification
and procurement of the requisitioned item.

Front 10

The priority designator is determined by
using the table of priority designators.
1. True
2. False

Back 10

(2) The priority designator is determined by
using the table of priority designators.

Front 11

What is the lowest two-digit priority
designator?
1. 01
2. 11
3. 13
4. 15

Back 11

(4) The priority designator is based on a scale
of 01 to 15 with 01 being the highest and 15
being the lowest priority.

Front 12

Cannibalizing inoperative equipment is an
authorized practice to obtain replacement
parts.
1. True
2. False

Back 12

(2) Do not cannibalize components you might
use sometime in the future.