Reading...
Play button
Play button
Use LEFT and RIGHT arrow keys to navigate between flashcards;
Use UP and DOWN arrow keys to flip the card;
H to show hint;
A reads text to speech;
11 Cards in this Set
- Front
- Back
|
Purpose of engine control quadrant
|
Provides a means to start/shutdown engine. Allows for Setting engine power
|
|
|
Definition of standby magnetic compass
|
Gives a heading reference relative to magnetic north.
|
|
|
What panel is used to operate the rescue hoist in normal op/ emergency op.
|
Crew hover control/ Rescue Hoist backup control
|
|
|
How many circuit breaker (CB) panels
|
Five
|
|
|
How much can the cargo hook lift
|
8000 lbs
|
|
|
Map of Collective/ Cylclic sticks
|
Attached to the flight control rods in broom closet
-> linked to Torque shafts -> boost servo & mixer which -> moves primary servos to: 1) Move PCR's up or down for lift (collec) 2) Change angle of swashplate for fwd, aft, lateral movement (cyclic) |
|
|
Where and What is part of the ADC supply? (4)
|
Air Data Computers, (fwd cabin port and stbd)
Airspeed, altitude, vertical acceleration, outside air temperature (OAT). |
|
|
Location/ Purpose of fuel selector levers
|
Engine control quadrant
control fuel flow from boost pumps to engine driven fuel pumps |
|
|
Location/ purpose of Accelerator Null switch
|
Port side lower console
Allows for in-flight nulling of all accelerometers |
|
|
Location/ Purpose of ICS operational control panel
|
Lower console
allows for internal communication between crew |
|
|
Map of rudder pedals
|
(changes angle of paddles to control heading)
Pedals -> flight contol links -> moves boost servo -> tail rotor cables ->tail rotor servo |
