• Shuffle
    Toggle On
    Toggle Off
  • Alphabetize
    Toggle On
    Toggle Off
  • Front First
    Toggle On
    Toggle Off
  • Both Sides
    Toggle On
    Toggle Off
  • Read
    Toggle On
    Toggle Off
Reading...
Front

Card Range To Study

through

image

Play button

image

Play button

image

Progress

1/24

Click to flip

Use LEFT and RIGHT arrow keys to navigate between flashcards;

Use UP and DOWN arrow keys to flip the card;

H to show hint;

A reads text to speech;

24 Cards in this Set

  • Front
  • Back

What is max pres drop for low pressure gas line in inches of WC

1max pre

Max pres drop for low pressure gas line in oz/in2

0.578

What is the max pres drop for low pres nat gas or propane

One inch water column

How would an undersized gas line be identified

If it drops more than 1 inch WC

6 factors that effect pres drop

1. Fittings + valves


2. Length of pipe


3. Type of pipe


4. Initial gas pres


5. Type of gas (specific gravity)


6. Vol of gasses flowing

Pressure drop is also referred to as

Pressure loss and pres differential

How to fix undersized gas line

Increase gas line size

What 2 tests are done to det pres drop

Standing and operating pres then calculate diff bet 2

How would pres drop be effected by increasing line pres

Would cause increase in pres drop

How would pres drop be effected by increasing gas flow

Increase in pres drop

How would increased line length effect pres drop

Increased friction causes increased pres drop

How would increasing number of fittings effect pres drop

Increased friction causes increased pres drop

How would decreasing line size effect pres drop

Increased friction causes increased pres drop

How would in reamed pipe effect pres drop

Increase friction and increase pres drop

Define U-tube manometer

Device used to measure gas pres. Has liq tube that displaces linear amount of liq

Gauge manometer

Use to measure low gas pres. Calibrated in inches of WC

Line pres test

Taken downstream of service regulator but upstream of app regulator when no gas is flowing

What does it mean when you get substantially high readings on line pres test

Regulator creeping. Means something is wrong internally with regulator

Standing pres test

Taken downstream of service reg. and or second stage reg and up stream of app(s) with only pilot(s) burning

Operating pres

Is pres taken downstream of service reg and up stream of app reg with app main burner(s) operating

Define differential pres

Diff bet standing and operating pres

Manifold pres.

Pres at burner taken downstream of app reg while main burner is operating

Define pres

Continuous force upon matter usually expressed in weight per unit area

Define flow

Movement of fluid from high pres area to low pres area