Reading...
Play button
Play button
Use LEFT and RIGHT arrow keys to navigate between flashcards;
Use UP and DOWN arrow keys to flip the card;
H to show hint;
A reads text to speech;
170 Cards in this Set
- Front
- Back
|
Which of the following are Class II items?
Clothing Petroleum & Oil Ammunition Blood |
Clothing
|
|
|
Who are the primary Material Managers for Class II assets?
General Service Administration and Defense Supply Center Philadelphia Southeast Sunbelt Region and Ogden Air Logistics Center General Service Administration and Defense Supply Center Richmond Greater Southwest Acquisition Center and Robins Air Logistics Center |
General Service Administration and Defense Supply Center Philadelphia
|
|
|
What is the subclass for Class II items?
Commercial Vehicles General Supplies Diagnostic Equipment Tactical Vehicles |
General Supplies
|
|
|
Which of the following are Class III items?
Bulk Chemical Products & Oils Battery & Clothing Fuses & Cable Screws & Bolts |
Bulk Chemical Products & Oils
|
|
|
. __________ is responsible for preparing the Bulk Storage Facility Report Annually.
GSA DLA DSCP DESC |
DESC
|
|
|
If an installation does not have permanently installed storage systems, use any container that meets opational, safety, storage and environmental requirements.
True False |
True
|
|
|
Which of the following is a drawback to the bladder?
Limited Service Life Weeps & Leaks Ruptures All of the Above |
All of the above
|
|
|
Which substitute grade is highly volatile?
JP-8 Jet A-1 Jet B JP-5 |
JetB
|
|
|
Which of the following are Class IV items?
Construction Raw Materials & Fortification/Barrier Material Batteries & Jet Fuel Tires & Tractors Liquid & Compressed Gases |
Construction Raw Materials & Fortification/Barrier Material
|
|
|
The Defense Supply Center in _____________ is the Executive Agent for construction and barrier material for those items not readily available on the commercial market.
New York Philadelphia San Francisco Richmond |
Philadelphia
|
|
|
Which type of resources are required almost immediately to complete the first element of opening an air base?
Class IV Class V Class III Class VII |
Class IV
|
|
|
Which of the following items are parts of Class V?
|
Ammunition, Projectiles, & Landmines
|
|
|
____________ is the transfer of stock from one service to another.
Strategic leveling Theater leveling In-line leveling Cross leveling |
Cross leveling
|
|
|
It is important that only qualified personnel and appropriate equipment are utilized in accordance with all international laws and DOD directives to prevent health hazards when disposing of Class V items.
True False |
True
|
|
|
Which items fall under Class VI?
Ammunition & Food Soda & Soap Coolants & Preservatives A & C |
Soda & Soap
|
|
|
The _______________ will request a deployable retail outlet to support the desired requirements.
Combat Commander Host Nation Military Exchange None of the above |
Combat Commander
|
|
|
Who has reign to make stockage decisions based on predicted customer demand?
Commercial Source Exchange Service Combat Commander Retail Outlet |
Exchange Service
|
|
|
Who has the authority to move Class VI merchandise into and through other countries?
Combat Commander Host Nation National Authorities The TPFD |
National Authorities
|
|
|
Normally, exchange service merchandise is disposed of using DRMS or DRMO.
True False |
False
|
|
|
Which of the following items are including in Class VII?
Scooters & Bicycles Train & Horse carriage Aircraft & Tanks Rockets & Grenade |
Aircraft & Tanks
|
|
|
Major end items having multi-service applications are managed by a single __________program office for the entire DOD.
Officer Organization Base Service |
Service
|
|
|
At what level is each branch able to decide quantity and location of Class VII replacements?
MAJCOM level Top level Operational and Tactical level Strategic level |
Operational and Tactical
|
|
|
The Class VII items can be part of ____________ or ______________ stocks.
Maintenance, storage Afloat, off-shore Program, material Organization, bonds |
Afloat, off-shore
|
|
|
Class VII items exposed to nuclear, biological and chemical effects must be surveyed for residual contamination risks.
True False |
True
|
|
|
Which items are included in Class VIII?
Medical & surgical supplies Aircraft & Tools Food & Clothing Vehicles & Spare Parts |
Medical & surgical supplies
|
|
|
The ___________ is responsible for the majority of peacetime distribution.
DLA GSA CCDR Prime Vendor |
Prime Vendor
|
|
|
_______________ is the executive agent for end to end medical supply support.
Air Logistics Center Defense Logistics Agency General Services Administration Prime Vendors |
Defense Logistics Agency
|
|
|
.________________will provide proper DRMS disposal action for expired non-radioactive and unusable medical supplies.
HSS DLA DSCP DOD |
HSS
|
|
|
Which items are included in Class IX?
Battery & Tractor Assemblies & Kits Tool & Particles Electricity & Natural Gas |
Assemblies & Kits
|
|
|
Class IX Repair part requirements are based on _________ allowances and predicted Demands to re-supply consumed inventory or obtain non-stocked items.
Organization Planning Base Unit |
Unit
|
|
|
The implication of reduced unit stock is increased ____________ and ____________demands on the global distribution system to support joint forces.
Rate & Time Mass & Weight Volume & Velocity MPH & KLM |
Volume & Velocity
|
|
|
Responsible for assigned Class IX assets executed through the DLA weapons
system inventory control points ___ Closely related to repair parts consumption___ Responsible for Class IX assets executed through service logistics___ Days of operation, flying hours and pertinent employment factors___ Regularly adjusted based on actual demand by the DOD stratification process___ A.Service Allowance B.Operating Tempo C.Services material Management D.DLA E. Inventory |
D. DLA
B. Operating Tempo C. Services Material Management A. Service Allowance E Inventory |
|
|
Which items are parts of Class X?
Tractor & Food Battery & Hammer Aircraft & Tire Blood & Fuses |
Tractor & Food
|
|
|
T.O.’S are used to provide clear and concise instructions for safe and reliable operation, inspection and maintenance of centrally and managed Air Force Systems.
True False |
True
|
|
|
Each assembly has an assigned SMR code which provides the following information?
Supports methods, repair level responsibilities, disposition instructions of maintenance activities. Repair level responsibilities, NHA, group activities Disposition of maintenance activities, usable on codes, NHA Support methods and repair level responsibilities only |
Supports methods, repair level responsibilities, disposition instructions of maintenance activities.
|
|
|
What is the most used TO series to research items without an NSN?
Illustrated Parts Breakdown Series Air Force Technical Order Illustrated Parts Breakdown illustration Individual Part Listing |
Illustrated Parts Breakdown Series
|
|
|
1. The Master Item identification and Control System also known as “D043A” was developed to provide Air Force personnel with interactive cataloging, standardization and other logistics management data for Air Force or user managed items.
True False |
True
|
|
|
Which one of the following is NOT an advantage of the DO43A system?
System availability is virtually continuous Facilitating the identification and resolution of logistics data problems in support of the Air Force mission D043 decreases the ability to perform research The system is password protected to provide secured access |
D043 decreases the ability to perform research
|
|
|
3. What other regulation besides AFMAN 23-110 outlines the policies governing the cataloging
systems? AFJI 23-504 USAFA 23-202 DOD 4100.39M AFJMAN 23-215 |
DOD 4100.39M
|
|
|
What TRIC is used to load a new item record into MMSYS (ES-S).
TRIC NEW TRIC FNL TRIC FEL TRIC FIL |
TRIC FIL
|
|
|
1. When an issue Request in inputted into the MMSYS, and I004 Management Notice is always outputted.
True False |
True
|
|
|
2. If items are available in a supply point, which management notice will this information appear on?
I006 I004 I023 I005 |
I023
|
|
|
3. When an I023 Management Notice is outputted and Customer Service Element takes steps to locate the asset outside of the LRS, this process is called Priority Verification.
True False |
True
|
|
|
Reviewing the I023 Management Notice is required to locate available assets, if any, in other locations such as which of the following?
GSA, DLA, GLSC, DEPOT LRS warehouse only Supply points, Bench stocks, WRM, DIFM Back shops Global Logistics Support Center warehouse |
Supply points, Bench stocks, WRM, DIFM Back shops
|
|
|
Issue requests and backorders prevents an Air Force organization/activity from performing its combat/support missions or tasks, or training for such missions or tasks.
UND A UND B UND C |
UND A
|
|
|
Issue requests and backorders when another UND does not qualify for assignment, requests are
automatically backordered if assets are unavailable in the warehouse. UND A UND B UND C |
UND C
|
|
|
Issue requests and backorders impairs an Air Force organization/activity from performing assigned combat/support mission or tasks.
UND A UND B UND C |
UND B
|
|
|
What TEX is used to reprocess a issue request if a substitute/interchangeable asset is
requested by the customer? TEX CODE N TEX CODE M TEX CODE C TEX CODE D |
TEX CODE M
|
|
|
If no substitute/interchangeable assets are available, the issue request will be cancelled or backordered only.
True False |
False
|
|
|
_____________ transactions are used to change various data elements on Retail
Supply System Due-In/Due-Out details. FIL DIT FIC TRN |
DIT
|
|
|
In the event the backorder item cannot be supplied to the customer, who can cancel the due-out and inform the customer of the action taken?
GSA DLA GLSC Customer Service |
GLSC
|
|
|
What Advice Code is used when a MICAP customer backorder is cancelled per customer request?
R F D Z |
Z
|
|
|
When using cancellation status codes ZG and ZH, the Retail Supply System will delete the requisition and assign REX 1 to the item record.
True False |
True
|
|
|
What DIC code is generated if the due-out is not linked to a due-in when a DOC is processed, but a due-in exists
DIC: A1C DIC: AC1 DIC: ACC DIC: ACI |
DIC: A1C
|
|
|
The cancellation request _____________ output transaction is used to request cancellation of retail supply requisitions from the source of supply.
AC1/AK1 A1C/AF2 ACC/AJ3 ACI/AL1 |
AC1/AK1
|
|
|
Failure to record Maintenance Turnarounds in the retail supply system will impact the _________ stock level.
Repair Base Sufficient Maintenance |
Base
|
|
|
Successful completion of a TRN transaction through the RPS system will result in an ________ management notice.
I006/I122 I023 I006 I122 |
I122
|
|
|
The _____________ is used to monitor status and maintain accountability/ visibility of issued assets controlled by maintenance activities.
D23 D04 D18 D19 |
D23
|
|
|
Who is the primary POC for repair cycle assets?
Wheel Repair cycle center Flight Service Center LRS Customer Service |
Flight Service Center
|
|
|
How long does it take a repair cycle part, when issued to maintenance, to show up on the D23?
The following day In 3 duty days In 2 duty days The same day |
The following day
|
|
|
Shows users how to select CTH records using a transaction date serial number ___________?
Stock Number Inquiry Transaction serial Batch Miscellaneous |
Transaction serial
|
|
|
Shows users how to select CTH records using multiple options and from those selections to produce a printed report ___________?
Transaction serial Stock Number Inquiry Batch Miscellaneous |
Batch Miscellaneous
|
|
|
Shows users how to select CTH records using the stock number and transaction date __________?
Batch Miscellaneous Transaction serial Stock Number Inquiry |
Stock Number Inquiry
|
|
|
On a “Detailed transaction inquiry screen output what line is the demand code on?
Line 3 Line 1 Line 10 Line 6-8 |
Line 10
|
|
|
On a Detailed transaction inquiry screen output what line is the ERRC code located on?
Line 3 Line 2 Line 1 Line 4 |
Line 2
|
|
|
________ is an air transportable package of readiness spears, repair parts and related maintenance supplies required to support planned wartime or contingency operations.
RSP MSK MRSP HRMSK |
MRSP
|
|
|
How many days can a mobility readiness spares package support a weapon system or weapon support system in a deployed location before re-supply is necessary?
60 days 90 days 30 days 120 days |
60 Days
|
|
|
4. What Tric is used to load, change or delete AMRSP details within the retail supply system?
FIL 1UB FET 1EB |
1UB
|
|
|
The process of ensuring RSP/WRM detail balances are as close to the authorized quantity for a deploying or transferred kit or kit segment is referred to as robusting?
True False |
True
|
|
|
TRIC ___________ is used to process a transfer from one kit segment to another kit segment.
TEX FCS 1KT 1UB |
1KT
|
|
|
Once the transfer document outputs, the WRM monitor distributes Copy 1 to ___________.
Procedures Losing Kit Organization Gaining Kit Organization Document Control |
Document Control
|
|
|
What management notice will output when serialized reporting assets are being transferred?
F115 F117 F118 F144 |
F117
|
|
|
Once the transfer document outputs, the WRM monitor distributes Copy 2 to ___________.
Procedures Losing Kit Organization Gaining Kit Organization Document Control |
Losing Kit Organization
|
|
|
. Once the transfer document outputs, the WRM monitor distributes Copy 3 to ___________.
Document Control Losing Kit Organization Gaining Kit Organization Procedures |
Gaining Kit Organization
|
|
|
. WRM/RSP deployment is the temporary ____________ of assets from home station to another location.
Movement Time Restriction Hold |
Movement
|
|
|
What type of flag will prevent a possible warehouse refusal?
Refusal Flag Segment Flag Deployment Flag Status Flag |
Status Flag
|
|
|
Transfers are accomplished by processing a TRIC ________________.
1KT 1WD ISU TRM |
1WD
|
|
|
. When transferring kit segments, which program will create records with the project flags and project codes associated with the stock numbers and kit segments selected?
NGV883 NGV914 NGV741 NGV466 |
NGV741
|
|
|
. ____________ downloads and uploads transferred package assets for redeployment.
Transferring Unit Gaining Unit Deploying Unit |
Transferring Unit
|
|
|
_____________ loads the transferred package information into CSB.
Deploying Unit Transferring Unit Gaining Unit |
Gaining Unit
|
|
|
._____________ documents all transactions using the R43.
Deploying Unit Transferring Unit Gaining Unit |
Gaining Unit
|
|
|
What S07 output is processed in “serial number authorization record” sequence?
XVF XTJ SIFS 1EBI |
XTJ
|
|
|
What S07 output is processed in “WRM authorization input record” sequence?
XVF XTJ SIFS 1EBI |
XVF
|
|
|
____________ is an automated way to process RSP authorizations.
S07 1EBI XVF XTJ |
SO7
|
|
|
TRIC _____________ displays the kit serial number.
S07 1EBI XVF XTJ |
1EBI
|
|
|
_____________ is used by operations personnel to load authorizations.
SIFS 1EBI XVF XTJ |
SIFS
|
|
|
The S05 reconciliation program identifies variances between the _____________ file and the materiel management system records?
System Working Master Management |
Master
|
|
|
What listing contains matching authorizations and detail records when there is a difference in the authorized quantity?
Quantity Variance (Part 1) Input No Matching Detail (Part 2) Detail No Matching Input (Part 3) Note Code Variance (Part 4) |
Quantity Variance (Part 1)
|
|
|
What listing contains RSP authorizations that do not have an RSP detail loaded in the database?
Quantity Variance (Part 1) Detail No Matching Input (Part 3) Input No Matching Detail (Part 2) Note Code Variance (Part 4) |
Input No Matching Detail (Part 2)
|
|
|
What listing contains RSP records without matching RSP base authorizations?
Quantity Variance (Part 1) Input No Matching Detail (Part 2) Detail No Matching Input (Part 3) Note Code Variance (Part 4) |
Detail No Matching Input (Part 3)
|
|
|
What listing contains RSP details with a note code of 1, 3, or 4?
Quantity Variance (Part 1) Detail No Matching Input (Part 3) Input No Matching Detail (Part 2) Note Code Variance (Part 4) |
Note Code Variance (Part 4)
|
|
|
Who must identify equipment tasked for deployment?
Owning Units Supply Liaison Section Chief |
Owning Units
|
|
|
All units should refer to the squadron or shop _________ materiel list to ensure that all required items are available for shipment.
ART SITS RSP LOGPLAN |
LOGPLAN
|
|
|
The HAZMAT certification authorization letter with commander’s or designated representative signature must be submitted to whom?
War Reserve Function TMF Log Planners Transportation Management |
TMF
|
|
|
Which of the following steps is NOT one of the recommended steps to ensure a successful shipment?
Place assets in bin with bubble wrap Conduct an inventory before deployment Properly mark HAZMAT items Ensure an administrative supply kit is included |
Place assets in bin with bubble wrap
|
|
|
. A TRIC ________ input transaction must be used to process a retail supply detail record issue.
ISU 1UB MSI CTH |
MSI
|
|
|
When processing an issue from detail records, if the item is a MICAP, what will be placed in position 65-66?
UTC UJC MSI RSP |
UJC
|
|
|
If the customer processed the detail record transaction, where will the request output documentation (DD Form 1348 1A) kick out?
At the Customer Service section’s terminal At the customers computer terminal At the terminal where item is stored At the storage and issues section terminal |
At the terminal where item is stored
|
|
|
A ____________ is the primary method to move equipment.
ISU TIN Transfer MSI |
Transfer
|
|
|
______________ is only done when authorized by GLSC.
Transfer between custodians Transfer between organizations Transfer within an organization |
Transfer between organizations
|
|
|
. A ______________ is only done when the LRS EAO or GLSC EME/AFVESA agree to transfer.
Transfer between custodians Transfer between organizations Transfer within an organization |
Transfer between custodians
|
|
|
The gaining custodian submits a request for transfer to the GLSC EME/AFVESA to _________________.
Transfer between custodians Transfer between organizations Transfer within an organization |
Transfer within an organization
|
|
|
What TRIC is used to transfer accountability in support of disaster relief operations?
ISU 1UB 1ET FET |
1ET
|
|
|
What TRIC is used to transfer equipment between custodians?
ISU 1UB 1ET FET |
FET
|
|
|
What listing is utilized to determine if assets are available in a kit during EDO (Expeditionary Degraded Ops)?
M10 R43 D04 D23 |
R43
|
|
|
TEX code ____ is used in EDO to reflect a degraded operations issue to the customer.
8 6 7 H |
6
|
|
|
During Expeditionary Degraded Operations (EDO), most issue requests for supplies are submitted using _______________.
AF Form 1996 AF Form 2005 DD Form 1348-1A |
AF Form 2005
|
|
|
______________ has the discretion of opting to use a spreadsheet in lieu of the AF Form 2005.
NCOIC Commander Accountable Officer Mobility Section |
Accountable Officer
|
|
|
_________ provides 100% accountability of all assets deployed within an MRSP.
R43 R01 C13 AF Form 2005 |
R43
|
|
|
_______________ is created to keep track of every transaction taking place during Degraded Operations Environment (DOE).
AF Form 2005 Tracer Listing Notepad Tracking Document Equipment Custodian Listing |
Tracer Listing Notepad Tracking Document
|
|
|
_______________ is signed by customer upon delivery of an item and used for accountability.
AF Form 2005 Tracer Listing Notepad Tracking Document DD Form 1348-1A R43 |
DD Form 1348-1A
|
|
|
To better aid in the ease of locating assets, the R43/NGV876 program is run in stock number sequence. This is accomplished by placing an “X” in position 61 while processing TRIC:________.
MSI TRM 1UB IRC |
IRC
|
|
|
Normal in-checking and inspection of turn-in’s are explained in AFMAN 23-110, Vol 2, Part 2, Chapter __________.
3 9 7 13 |
13
|
|
|
The Logistics Readiness Squadron designates ________________ as the section Repair Cycle Support sends copy 2 of the AF Form 2005, serviceable return, for possible DOR action.
Stock Control Pick Up & Delivery Distribution Element War Readiness |
Stock Control
|
|
|
What TRIC is used to process a turn-in?
TRIC TRN TRIC REC TRIC MSI TRIC TIN |
TRIC TIN
|
|
|
Given the following documents, which one is NOT needed to process an unserviceable repairable TRIC: TIN under degraded operations?
Copy of original AF Form 2005 AF Form 1297 DD Form 1577-2 AFTO 350 Tag |
AF Form 1297
|
|
|
Two types of non-directed shipments are automatic and special.
True False |
True
|
|
|
What TRIC is used for all non-directed shipments to force ship items from stock?
RVP SHP REC TIN |
SHP
|
|
|
To prevent automatic replenishment of the detail assets, what TEX code is used in position 51 of the AF IMT Form 1991 while in degraded operations?
F 6 4 M |
F
|
|
|
Stock Control is responsible for requesting disposition instructions from the ________________ for unserviceable repairable assets.
Stock Control Item Managers Flight Chief Flight Service Center |
Item Managers
|
|
|
Which of the below is NOT required during Expeditionary Degraded Operations Environment (EDO)?
MSK/MRSP Listing (R43) Supply Point Listing (Q13) CA/CRL (R14) Repair Cycle Asset Management List (D23) |
CA/CRL (R14)
|
|
|
What TEX code is entered in position 51 of the AF Form 2005 and what letter is entered in Block 1 to indicate a due-out will be established?
7; D 2; E 6; D 5; I |
7; D
|
|
|
What TRIC is used when preparing an issue request for XD/XF assets?
DUO DOU SPR FID |
DUO
|
|
|
A due-out detail record is established to indicate the SOS owes the customer an item.
True False |
True
|
|
|
The purpose of UMMIPS is to provide a standard method of ranking competing needs among activities according to their overall importance.
True False |
True
|
|
|
Who is responsible for processing TRIC: SPR with TEX code 7 in the Materiel Management System when it becomes available?
War Readiness Element Stock Control Customer Service Storage and Issue |
Stock Control
|
|
|
The off-line serial numbers assigned to special requisitions range from 9000 to _________.
9499 9599 9800 9899 |
9899
|
|
|
______________ must ensure that all receipts are processed for all property marked for local supply and equipment stock record accounts.
Customer Service Accountable Officer Equipment Custodian Receiving |
Receiving
|
|
|
What form is used to create the REC input document while in a degraded operations environment?
1348 1297 2005 1991 |
1348
|
|
|
What listing is used to cross reference receipt document information?
R43 R28 R01 Q13 |
R28
|
|
|
What resources should you use when creating a DOR in a degraded operations environment? Choose all that apply.
Issue Document Due-in Receipt Listing (R28) Receipt Document Due-out Receipt Listing |
Due-in Receipt Listing (R28)
Receipt Document |
|
|
If a due-out release can be made, prepare a four part DD Form 1348-1A using _________ from the R28 and receipt document?
Shipping information Item Record Indicative Data Detailed Data |
Indicative Data
|
|
|
Who is responsible for appointing the Control Team Chief within the LRS?
Document Control Chief Control Team LRS Commander/AO LRS Director of Operations |
LRS Commander/AO
|
|
|
Sequencing inputs prior to processing is important to prevent what from happening?
Rejects Incorrect Data Corrupt Files Both A and B |
Rejects
|
|
|
Discoverer solves many of the problems normally associated with databases and provides many capabilities. Based on the information given, select the item that is NOT an example of the capabilities discussed?
Share data with other personnel utilizing different formats such as EXCEL Make changes to the business areas as necessary Prepare reports of results and findings View data in a familiar format that is easy to read and understand |
Make changes to the business areas as necessary
|
|
|
The __________ layer allows Discoverer to hide complexities and details of the underlying database.
End User Layer Start User Layer Hidden layer Script layer |
End User Layer
|
|
|
The administrative edition of the end user layer is used to create _________?
Workbooks Worksheets Joins Folders |
Folders
|
|
|
What type of window will appear if the report you are building requires additional information?
Query window Parameter window Workbook window Ad-hoc window |
Parameter window
|
|
|
Performing a query in discoverer allows users to modify pre-existing workbooks?
True False |
True
|
|
|
Discoverer provides the capability to export any report created into _______ or _______ formats to improve the efficiency of data flow between work centers?
HTML or EXCEL TEXT or HTML WORD or EXCEL EXCEL or TEXT |
HTML or EXCEL
|
|
|
________ is used to process daily traffic movement at aerial ports?
GATES ESS ITV TRANSCOM |
GATES
|
|
|
GATES supports two types of aerial ports, ________ and ________?
Portable and Modular Fixed and Deployed Internal and External Single-level and Multi-level |
Fixed and Deployed
|
|
|
Identify ALL the items that are interrogation capabilities provided by GATES?
Supports multiple levels of security Primary means of capturing cargo and personnel movement Exploits the use of automatic identification technology Not a feeder system for GTN |
Supports multiple levels of security
Primary means of capturing cargo and personnel movement Exploits the use of automatic identification technology |
|
|
GATES is equipped with the capability to ________ PC’s from their access point on the LAN and relocate them to the area where processing and tracking are being conducted without interruption.
Track Reverse Disconnect Operate |
Disconnect
|
|
|
TRIC ________ is used to load, change and delete Supply Point detail records?
MSI FSP FCD FCS |
FSP
|
|
|
Which update to a supply point detail record updates applicable substitutes by program control?
Delete Load Change Inquiry |
Change
|
|
|
Which update to a supply point detail record requires the on-hand quantity to be zero?
Delete Load Change Inquiry |
Delete
|
|
|
Which update to a supply point detail record assigns organization code 005?
Delete Load Change Inquiry |
Load
|
|
|
The main objective of a supply reconciliation is to?
Conduct an inventory for the organization Verify any excess on the various details assigned Establish a request on less than authorized quantity Point out supply point balance discrepancies |
Verify any excess on the various details assigned
Establish a request on less than authorized quantity Point out supply point balance discrepancies |
|
|
The Q04 listing complements the DIFM listing.
True False |
True
|
|
|
What flight uses the repair cycle data listing to review records with exception repair cycle days?
Stock Control Material Management Repair Cycle Support Operations Support |
Stock Control
|
|
|
Property _________ describes the use of an item for its intended purpose in its present state?
Condition Status Identity Description |
Status
|
|
|
The _________ is the only person authorized to determine the condition, status and identity of property for all material management supply accounts?
Item Manager NCOIC Flight Chief Inspector |
Inspector
|
|
|
If a base receives an item that is damaged, misidentified or has other problems, the inspector must report the discrepancy using what form?
AFTO Form 350 DD Form 1348-1A SF 364 DD Form 1570 |
SF 364
|
|
|
When the condition of an asset is in question or when the serviceable tag has been lost, defaced or destroyed, the supply inspector must have an authorized maintenance person perform a ________?
Bench check Condition Change Identity Change Reverse Post |
Bench check
|
|
|
The condition of an item determines its _______?
Purpose Use Condition Physical State |
Physical State
|
|
|
What condition does DD Form 1575/-1 indicate?
Test or modify Serviceable Suspended Unserviceable, not reparable |
Suspended
|
|
|
What condition does DD Form 1576/-1 indicate?
Test or modify Serviceable Suspended Unserviceable, not reparable |
Test or modify
|
|
|
What condition code corresponds to DD Form 1574/-1?
P G C A |
C
|
|
|
What condition code corresponds to DD Form 1577/-1?
P G C A |
P
|
|
|
What condition code corresponds to DD Form 1577-2/-3?
P G C A |
G
|
|
|
If it is necessary to process an identity change input, what TRIC will you process?
FCC FCD FCH FCI |
FCH
|
|
|
If a TRIC FCH is not used to correct the identification of an item, process a _______?
Stock number load Turn-in Issue request Reverse-post |
Reverse-post
|
|
|
When would an identity change be authorized?
The error results from processing receipt The manufacturer put the wrong part number on the item To adjust the inventory of an item record To correct an out of balance condition. |
The manufacturer put the wrong part number on the item
|
|
|
When does a partial issue exist?
When the quantity does not match the receipt document The manufacturer put the wrong part number on the item When the quantity is less than the customer When the quantity is less than the due-in quantity |
When the quantity is less than the due-in quantity
|
|
|
In what position will you place the quantity variance flag when processing an excess receipt?
Position 30 Position 62 Position 65 Position 51 |
Position 65
|
|
|
What is the quantity variance flag for a receipt processed as a shortage?
Z S O A |
S
|
|
|
Prepare a(n) _______ when the quantity is greater than the quantity indicated on the receipt document
SF 364 DD Form 250 DD Form 1348-1A DLA Form 1224M |
SF 364
|
|
|
What product provides the customer with supply actions resulting from each customers input?
D04 D23 D06 D818 |
D04
|
|
|
Part _______ of the Daily Transaction Register lists all activity code Y transactions.
One Two Three Four |
Two
|
