Use LEFT and RIGHT arrow keys to navigate between flashcards;
Use UP and DOWN arrow keys to flip the card;
H to show hint;
A reads text to speech;
28 Cards in this Set
- Front
- Back
|
When using Merge Pattern, what must be set to import a part in a Right orientation? A. Right Side must be the active WCS, C & T Plane B. Use current attributes C. Mirror about "Z" D. A and B |
D. A and B |
|
|
A reference height is used to move the tool to a Z location between cuts. (True/False) |
True |
|
|
How do you change the parameters of multiple toolpath operations at the same time?
A. Edit common parameters B. Change NC file name C. Change Program # D. Renumber work offsets |
A. Edit common parameters |
|
|
Is it possible to gouge check the Entry and Exit for Lead In/Out? (True/False) |
True |
|
|
What is the primary benefit of copying operations? A. Reuse proven toolpath parameters B. Linking new toolpaths C. Translate operations D. Automatically regenerate operations |
A. Reuse proven toolpath parameters |
|
|
What is an important feature of FBM, even if you don't use it to generate toolpaths? A. Creates boundaries needed to drive or constrain tools B. Blanked geometry C. Analysis of a solid model D. Tool selection |
A. Creates boundaries needed to drive or constrain tools |
|
|
Which Drill Cycle do you select to cut the final depth in increments? A. Drill/Counterbore B. Peck Drill C. Tap D. Fine Bore |
B. Peck Drill |
|
|
Stock Setup is an FBM boundary for toolpaths. (True/ False) |
True |
|
|
When using Toolpath Transform, what parameter needs to be active to edit the result toolpath operations Plane (WCS)? A. Copy source operations B. Create new operations and geometry C. Subprograms D. Match existing offsets stored in planes |
B. Create new operations and geometry |
|
|
From default settings, what happens when you import a toolpath with work offsets (G54-G59) into a file with the same work offsets defined? |
The imported work offset is reassigned |
|
|
What function do you select to view boundaries created through FBM? A. Unhide Some B. Hide Entity C. Blank Entity D. Un-blank Entity |
D. Un-blank Entity |
|
|
Clearance height is a Z referenced location, used _________. A. To move between cuts B. To move between chains C. Both A and B D. None of the Above |
B. To move between chains |
|
|
Dynamic toolapths only use small depth cuts. (True/False) |
False |
|
|
In 2D Dynamic Mill or 2D Area Mill, which parameter must be set to machine to the edge of the stock? A. Machining Region Strategy (Stay inside) B. Machining Region Strategy (From outside) C. Open chain extension to stock D. Cut parameters |
A. Machining Region Strategy (Stay inside) |
|
|
Why is it important to know the sizes of internal radii on a part? A. To ensure the finish tool will fit B. To practice using the analyze function C. To understand the scale of the part D. All of the above |
A. To ensure the finish tool will fit |
|
|
What is a primary benefit of importing operations? A. Reuse proven toolpaths B. Linking new toolpaths C. Translate operations D. Automatically regenerate operations |
A. Reuse proven toolpaths |
|
|
Use Toolpath Transform when you want to run the same toolpaths in different locations or at different orientations in the same part file. (True/False) |
True |
|
|
In the Transform Operation Parameters dialog box, the Reset points button will: A. Set the From point location to zero B. Set the To point location to zero C. Set both To and From point to zero D. None of the above |
C. Set both To and From point to zero |
|
|
What is generally the most efficient way to group transformed operations? A. By work offset B. By toolpath type C. By tool size D. By toolpath length |
C. By tool size |
|
|
In 2D Dynamic Mill, or Area Mill, with Machining region strategy set to From Outside, the Approach distance is used to: A. Keep the tool from plunging onto the material B. Keep the tool from machining avoidance regions C. Keep the tool from machining air regions D. None of the above |
A. Keep the tool from plunging onto the material |
|
|
In Stock Setup, what is a bounding box used for? A. Controlling where your tool is allowed to go B. Setting the limits of your tool motion C. Create a rectangular or cylindrical boundary around selected entities D. Creating an additional solid model |
C. Create a rectangular or cylindrical boundary around selected entities |
|
|
The Stock Plane should always be set to _________. A. Top B. The correct orientation of the Stock C. Front D. The active WCS |
B. The correct orientation of the Stock |
|
|
What key or keys do you hold down to select multiple operations? A. Shift B. Shift or Ctrl C. Shift and Ctrl together D. Ctrl |
B. Shift or Ctrl |
|
|
To transform an operation from a bottom tool plane to a top tool plane and flip the Z, you must: A. Set the method in the Transform Operation parameters B. Select the plane in the Translate tab C. Set the plane in the Planes Manager D. Both A and B |
D. Both A and B |
|
|
When including points in your chain selection, which options should you select on the Lead In/Out page? A. Use entry point, Use exit point B. Enter on first depth cut only, Exit on last depth cut only C. Adjust start of contour, Adjust end of contour D. Gouge check, Overlap |
A. Use entry point, Use exit point |
|
|
When generating an FBM toolpath, you must create a new toolpath group. (True/False) |
False |
|
|
A 2D High speed toolpath will only Climb cut. (True/False) |
False |
|
|
2D High speed toolpaths have an offset value that is applied to the Machining region to ensure the tool does not engage too much material during the first pass. (True/False) |
True |
