Use LEFT and RIGHT arrow keys to navigate between flashcards;
Use UP and DOWN arrow keys to flip the card;
H to show hint;
A reads text to speech;
8 Cards in this Set
- Front
- Back
- 3rd side (hint)
WHY IS |
WE DON'T KNOW, WHY? |
|
|
WHAT FACTOR DETERMINES THE MELTING POINT OF A SOLDER ALLOY?
1. PERCENTAGE OF TIN IN THE ALLOY 2. LENGTH OF TIME HEAT IS APPLIED 3. TYPE OF CORE MATERIAL IN THE ALLOY 4. TERMPERATURE OF THE SOLDERING IRON |
PERCENTAGE OF TIN IN THE ALLOY
|
REF: NAVEDTRA 14176, NEETS, MOD 4, PG 2-34
|
|
THE SHIP'S CSMP IS THE RESULT OF THE SUBMISION OF WHAT FORM?
1. COMPLETED ACTION 2. DEFERRED ACTION |
DEFERRED ACTION
|
REF: NAVSEAINST 4790.8
|
|
THE Ihp OF AN INDIVIDUAL COMBAT SYSTEM ELEMENT IS DESCRIBED BY WHICH OF THE FOLLOWING STATEMENTS?
1.Ihp SHOULD ALWAYS BE EQUAL TO Bhp 2.Ihp IS A COMBINATION OF RPI AND Bhp 3.Ihp IS THE TILT ANGLE BETWEEN TWO PLANES 4.Ihp IS MEASURED CLOCKWISE FROM THE ZERO INCLINATION LINE |
Ihp IS THE TILT ANGLE BETWEEN
TWO PLANES |
REF: NAVSEA SW225-AO-MMA-010, PG 2-2.2
|
|
WHICH OF THE FOLLOWING RADAR CHARACTERISTICS IS NOT DETERMINED BY THE IF SECTION?
1.Gain 2.Bandwidth 3.Pulsewidth 4.Signal-to-noise ratio |
Radar pulsewidth is not determined by the IF section. The IF section determines the gain, bandwidth, and S/N ratio of the radar.
|
REF: NAVEDTRA 14190, NEETS, MOD 18, PG 2-30
|
|
The process of changing analog data to a digital format is described by which of the following terms?
1.Converting 2.Decoding 3.Encoding 4.Recoding |
The process of changing analog data to a digital format is known as
encoding. |
REF: NAVEDTRA 14100, Fire Controlman, VOL 3, PG 13-3
|
|
The CIWS BREAK ENGAGE control should be used to prevent which of the following undesirable situations?
1.Engagement of a friendly aircraft 2.Engagement of a friendly ASM 3.Two CIWS engaging the same target 4.Engagement of debris following a target kill |
BREAK ENGAGE should be used to prevent the engagement of a friendly aircraft.
|
REF: NWP 3-01.12, PG 4-114
|
|
The symmetry of the dot on an oscilloscope screen is adjusted with what control?
1.ASTIGMATISM 2.DC BALANCE 3.FOCUS 4.INTENSITY |
The ASTIGMATISM control adjusts the symmetry of the dot.
|
REF: NAVEDTRA 14188, NEETS, Mod 16, PG 6-14
|