Use LEFT and RIGHT arrow keys to navigate between flashcards;
Use UP and DOWN arrow keys to flip the card;
H to show hint;
A reads text to speech;
85 Cards in this Set
- Front
- Back
PCIe based core cards also have accel chips on them, offering Accel-only plug-ins and increased DSP processin power in HD 1 and HD 2 configurations
|
none
|
|
how many accel cards can be installed in a single pro tools HD system in addition to the HD core card?
|
7 total (counting the HD Core card)
|
|
What does the 48-bit mixer offer
|
+54 dB of mix headroom
|
|
what are some differences between HD and LE systems
|
HD uses PCI / PCIe cards, ADC (automatic delay compensation), HD offers higher buffer settings.
|
|
where can clock source be changed?
|
session setup window
Setup>session or command [2] |
|
the default sample rate can also be set in...
|
playback engine dialog box
|
|
why does pro tools HD allow you to use higher buffer settings than LE
|
Because all mixing duties are performed on dedicated DSP chips freeing the CPU exclusively for RTAS processing
|
|
as a general rule, on a multicore system you should allocate how much available processor power to rtas processing?
|
half because most of your processing will be dedicated to DSP chips with TDM plugins
|
|
typically you should select the highest number of voices with the smallest number of DSP chips to meet your needs.
True or False |
True
|
|
adding RTAS plugins on aux inputs or master faders requires additional voices.
True or False |
True
|
|
when playing or recording audio in a session with many tracks with dense automation how can you prevent errors.
|
increase amount of DSP chip/ voices and or increase DAE buffer size
|
|
CPU (RTAS) Meter:
how to increase cpu processing |
increase HW buffer size and or RTAS processors and or CPU usage
|
|
CPU (elastic) meter
how to increase elastic audio processing |
render elastic audio track
|
|
if you need to increase your voice count Mid-Session you can do this where
|
in the number of voices selection in the playback engine dialog box
|
|
most digi design TDM plugins support plugin sharing as do some third party manufacturers
True or False |
True
|
|
what does the HW insert delay tab do in the I/O setup window?
|
used for pro tools delay compenation to time align input paths when a hardware insert is used.
|
|
how can you move multiple I/O assignments at once?
|
by "lassoing" around the grid assignments until they are all highlighted then clicking and moving them to a new location
|
|
if any paths overlap or have identical path names you will be prompted to correct them before the I/O setup dialog box will close.
T/F |
T
|
|
when a main path is remapped what happens to its sub paths?
|
they will remap automatically to maintain consistent routing
|
|
Does pro tools still show paths that are unavailable?
|
yes unless they are deleted or re-assigned to valid paths.
|
|
what does the DAE (DIgi Audio Engine) buffer dtermine?
|
how much ram is used
|
|
Voice allocation:
each DSP chip corresponds to a bank of voices. when you choose 192 voices (6DSP) you will have access to how many banks of voices? |
6 (A-F)
|
|
stereo tracks require two voices for record and playback while mono tracks require 1 voice for record and playback
T/F |
T
|
|
will deactivating other types of tracks such as aux instrument etc. free up voices in your session?
|
no, voicing only affects audio tracks. Unless there is an rtas plugin on the aux
|
|
how many tracks are supported on a single firewire/1394 hard drive at 44.1 and 48 khz sample rates?
|
32 tracks, (fewer tracks on a higher sample rate)
|
|
round robin disk allocation does what?
|
automatically distributes new tracks to any drives that are enabled for recording. (use with caution)
|
|
how can you quickly locate the current insertion point?
|
by pressing the left or right arrows
|
|
quick keys:
how to simultaneously scroll both mix and edit windows to certain track. |
1. right click on track and choose "scroll into view"
2.shift+control+click on tracks name plate in either mix or edit window 3.shift+control+click on tracks name plate in tracks list |
|
when would assigning the same voice to multiple tracks be useful?
|
track priority, where the top most or left most track plays the voice instead of both or the second track.
|
|
describe 3 ways to deactivate a track
|
1. right click on track and choos make inactive
2.command+control+click on track logo 3.click and hold on logo in mix window and choose make inactive. |
|
how many scroll options and what are they
|
5
no scrolling, after playback, page, continuous, center play head. |
|
the data base pass is completed before the file system pass
T/F |
T
|
|
can you save presets for each type of browser?
|
yes, up to 5 and defaults the 1st preset when you open the browser for the first time.
|
|
with automatic relink, what must match in order to relink your files?
|
both name and ID
|
|
quick keys:
modifier for duplicating tracks? |
option+shift+D
|
|
the option when duplicating a track to insert after last selected track has no effect when...
|
you re duplicating a single track
|
|
name 3 types of browsers
|
1.project browser
2.workspace browser 3.volume browser *project shows all files in session including those on different volumes |
|
which browser quickly shows all the files currently used in the session even if they reside on multiple drives?
|
project browser
|
|
which column in the workspace browser shows whether an audio file has been analyzed for alastic audio? what icon is used to denote that the file has been analyzed?
|
the status column, a check mark
|
|
when is the find all candidates method for relinking more useful? when is find links method preferred?
|
find all is for few files, find link is for many files.
|
|
when a file does not automatically relink during automatic find and relink it is because...
|
the file is shared with another session and renamed in the session (both the file and the ID must match)
|
|
Quick Keys:
how do you select all tracks including conductor rulers? |
hold option while dragging in a time based ruler.
|
|
Quick Keys:
how do you make identical selections across multiple tracks? |
shift+click
|
|
Quick Keys:
what modifier changes nudge values |
option+command [+] [-]
|
|
how do you make selections with the scrubber tool?
|
1. make sure edit insertion follows scrub shuttle
2.select scrubber tool 3.hold shift and scrub your selection |
|
Test question:
on vca master tracks, what does the level meter indicate? |
the highest level occurring on any member track
|
|
Quick Keys:
how do you align the end of a region to the current location? |
control+command+click
|
|
Quick Keys:
how do you align the start of a region to the current location? |
control+click
|
|
Quick Keys:
How do you nudge the CONTENTS of a region without moving the region itself? |
control + [+] or [-]
|
|
Quick Keys:
How do you trim the start point of a region by nudge value |
option + [+] or [-]
|
|
Quick Keys:
How do you trim the end point of a region by nudge value |
command + [+] or [-]
|
|
name what keys enable the
trim tool selector tool grabber tool |
trim tool - F6
selector - F7 grabber - F8 *any combination of the two enable the smart tool |
|
Quick Keys: pre-roll audition
Play up to selection beginning |
option+left arrow <--
|
|
Quick Keys: pre-roll audition
Play up to selection end |
option+right arrow -->
|
|
Quick Keys: post-roll audition
Play from selection beginning |
command+left arrow
|
|
Quick Keys: post-roll audition
Play from selection end |
command+right arrow
|
|
how many memory locations can pro tools provide?
|
up to 999
|
|
can you import session markers?
|
yes, using the import session data command.
|
|
quick keys:
memory locations quick keys |
period + Numebr + period
|
|
how can you easily select everything to the right of the cursor?
|
shift + option + return
|
|
does pre / post roll need to be enabled to audition (using option / command left or right arrow)
|
no it does not need to be active
|
|
does nudge work in all edit modes?
|
yes
|
|
how do you store a selection as a memory location?
|
make a selection and press enter on keypad.
or make a selection>windows>memory locations>new memory location |
|
what does strip silence do?
|
cuts region and removes audio that falls below a certain threshold
|
|
Quick Keys:
what modifier keys would you use when adding an automation breakpoint for the previous value? |
option+command+click
|
|
Quick Keys:
what modifier keys would you use when adding an automation breakpoint for the next value? |
option+shift+click
|
|
when would you use trim automation mode?
|
when you want to apply offset automation to existing while preserving previous moves. (records new automation to playlists)
|
|
how can you paste automation from one parameter to another?
|
copy special then paste special
|
|
what is the purpose of setting the automatch time preference.
|
to return the automation back to its original value. (touch automation has this)
|
|
is it possible to have more than one vca master fader on a group?
|
no, unless it is a nested group and the dB values will be added together (+3 dB and -2 dB make +1 dB)
|
|
some rtas plugins cause latency, which kind especially do this.
|
dynamic plugins that have look ahead buffers.
|
|
what does inserting a TDM plugin between a RTAS plugin do and is this a good idea.
|
No, it causes unnecessary voice usage.
|
|
Quick Key:
how do you save settings for a targeted plugin? |
command + shift + S
|
|
how would you quickly enable/disable delay compensation engine?
|
options>delay compensation
|
|
what are the different solo modes?
|
Solo in place (SIP)
Pre Fader Listen (PFL) After Fader Listen (AFL) |
|
where are plugin files stored
|
root settings or session settings
|
|
what types of plugins feature side chain processing
|
dynamic
|
|
inserts, sends, input, outputs that use dsp.
|
time adjuster for delay compensation.
|
|
name two ways to internally make a stereo recording in pro tools
|
Bounce, Layback
|
|
with phasescope what does +1 mean on the phase meter?
|
it is possitively out of phase
|
|
Quick Keys:
what do you press to assign outputs on all selected tracks. |
option + Shift
|
|
Each hd audio interface provides how many inputs and outputs?
|
16 in 16 out
|
|
I/O setup dialog box defines signal paths for what?
|
Inputs, outputs, inserts, buses, and mic pre amps
|
|
What does digi base let you search with?
|
Name, kind, or date midified
|
|
Whatdoes digi base pro let you search with?
|
Same as digi base but also data column, comment fields, sample rate and so on
|