Use LEFT and RIGHT arrow keys to navigate between flashcards;
Use UP and DOWN arrow keys to flip the card;
H to show hint;
A reads text to speech;
38 Cards in this Set
- Front
- Back
What are the 3 types of Analog Automation?
|
Tape based, Disc Based, Mechanical Fader
|
|
What are the Tape Based and Disc Based Automation. Who introduced the disc based? What model?
|
Tape based: 2 tracks on tape, minimum of 5 tracks apart. Disc Based: Store data on disk (SSL Introduced this on the B series desk)
|
|
What could the disk based systems automate?
|
LF, LF Cut, Master Fader
|
|
What is Mechanical Fader Automation? What can it automate?
|
Moving large Faders,more automated features - LF, LF cut, EQ on/off, Insert on/off
|
|
VCA Automation System 3 Modes
|
Write, Update, Read
|
|
What does the Write Pass establish?
|
1. Null Points = amount of CV presents at each fader at any particular point in time
2. To/From points = est. where automation starts from and goes to |
|
SSL Terms: Absolute, Trim, Mix Review
|
Write/ ABS Pass, Update / Trim Pass, Read/ Mix review or Replay
|
|
FF: What are the modes and Statuses in regarding the faders?
|
Modes= Global
Status= Local |
|
What are the SSL E Series Statuses?
Is this what we have in school? |
Absolute, Trim, Play Faders Only, Play Cuts only, Preview Trim, Master Flip. No.
|
|
What are the SSL G Series Statuses?
|
1) Absolute, 2) Trim, 3) UA, 4) RC, 5) AT, 6) PV, 7) IP, 8) UA+RC 9) Level Match
|
|
SSL G Status: 1. What is Absolute? How do you access this?
|
1. Established faders not set in ABS pass 2. Overwrite previous automation. Press fader status switch once
|
|
SSL G Status: 2. What is Trim? How do you access this?
|
Update. Press fader status switch twice (third time = replay)
|
|
SSL G Status: 3. What is UA? How do you access this?
|
Update by ABS (U or 1)
|
|
SSL G Status: 4. What is RC ? How do you access this?
|
Revise Cuts, overwrites previous cut info. (R or 2)
|
|
SSL G Status: 5. What is AT? How do you access this?
|
Auto Takeover, return fader to null point Quickly. Replay, hit fader stat= trim, hit again= AT
|
|
SSL G Status: What is PV? How do you access this?
|
Preview, heard but not written. (P or 4) Hit stat = preview abs, hit again = abs, 3x= preview trim 4x= trim.
|
|
SSL G Status: What is IP? How do you access this?
|
Immediate Pickup - stop and save = allows you to place a fader into status without pressing fader stat switch
|
|
SSL G Status: What happens when you do UA (update by abs) + RC (revise cuts)
|
Plays Cuts Only
|
|
SSL G Status: What is Level Match? How do you access this?
|
Mix Review, hit MIX
|
|
What are the 7 SSL6000 E/G Automatible Controls?
|
1. LF, 2. LF Cuts, 3. GF, 4. GF Cuts and 5. Solo, 6. Master Fader, and 7.Auto Fade
|
|
Does the SSL need timecode to record automation?
|
No.
|
|
How do you set up the automation on the SSL E/G?
|
syntax:1) NAME> TITLE> "type name"> EXEC. 2) Spot the tape where you want the automation to start, hit: SET UP> MIX> EXEC (all faders set to ABS). Tape will begin to play
|
|
SSL E/G: At the end of the ABS pass and each automated pass, what do you do?
|
syntax:1) END key = stops the tape and ends automation. 2) Says "Name of mix?" Type in name or hit CANCEL 2x to dump the mix. 3) hit GOTO> JOIN> MIX> FROM> CUE>"cue name" >EXEC. or "point in time= HH:MM:SS> EXEC
|
|
SSL E/G : What five things could you store in a storage folder?
|
1. Automation Data 2. Recall Data 3. Cue Points 4. Tracksheet Info 5. Session Notes
|
|
SSL E/G: What are the 2 disk drives in the computer?
|
1. Program Disk= Operating Instructions (automated events are temporarily written into this)
2. Reel Disk= Storage Disk (travels with the project, with the tape) |
|
When can you automate on the SSL E/G?
|
When the system says MIX RUNNING
|
|
SSL E/G: How do you put the system in MIX REVIEW? How do yo go back to MIX RUNNING?
|
Hit rewind @ point in time which creates a rollback point. once you press play and pass the rollback point, changes to MIX RUNNING (can automate from that point)
|
|
SSL E/G: What are the 2 ways to punch in pre-rollback point?
|
Use level match to find the null point ( so no amp change can be heard at punch in) 1. hit JOIN= goes from MIX REVIEW to MIX RUNNING (can automate) 2. REVISE key= recalculates faders to null points.
|
|
SSL G Status: With LEVEL match on, could you automate?
|
You cannot, globally.
|
|
How do you set up the Auto Takeover (AT)?
|
1. hit A for AT 2. hit fader stat switch once for trim 3. Set changes in amplitude 4. hit fader status switch 2nd time = now in AT
|
|
How do you load into SSL E/G Systems?
|
Insert reel disk. LOAD> EXEC
LIST> TITLE> EXEC. Move cursor to current file (or) GOTO> TITLE> "type in title"> EX LIST> MIX>"type in mix"> EXEC hit MIX on/off GOTO> JOIN> MIX> "type in mix" EXEC |
|
SSL E/G: How do you pull up a recall?
|
LIST> TITLE> EXEC
GOTO> TITLE> "type in name" > EXEC LIST> SETUP> EXEC (shows recall) PLAY> SETUP>"type in setup" EXEC |
|
What are the recall options for the SSL E/G? What do they do?
|
TR autoscan: Recall all chan(6 choices)
thumbwheel: Lists chan by # w/ thumbwheel # Copy to Swap: Swap setting of chan w/ another I/O |
|
SSL E/G: How do you access recall options?
|
Press A for Autoscan
Press T for thumbwheel Press Copy to Swap |
|
What are the 6 choices for TR autoscan? How do you access them?
|
1 Routing Press R
2 Dynamics Press D 3 EQ Press E 4 Cues=Aux Press C 5 Monitor=SF Press M 6 EXEC for whole channel |
|
2 Things to do before turning on automation for Flying Faders
|
1. Clear mix memory (check mix pass box) 2. Check automation mode (press RSI switch, hold select switch on master
|
|
What are the 3 modes of automation for flying faders?
|
Record= Write and Playback
Save= Playback only Isolate= No write, no Play |
|
FF: What are the 3 status' of the faders?
|
1. Relative= default status for record
2. Replace= rewrite/overwrite previous automation (press rec. button LED lights up, now in replace ready, touch fader for replace) 3. Automatch= When you remove your finger from fader, auto returns to null point (press match + rec to enter this status) |